so i have a 2000 mustnag(v6) K&N intake, dual 40 series flowmasters(with an custom H-pipe), steeda tri-ax short shifter, cobra rims(11.5 inch width in rear), what would u suggest for cams( i kno absolutely nothing about cams so i mean any help at all would be appreciated)...looking for osmething mid-range though....and i also ordered 4.10 gears and the t-lok so i need to know what to do next on the cams..nothing low end or high so what website and everything should i order from...thx
cam help
- Thread starter MUUUstangs_rock
- Start date
I would say contact the guys where you want to get your cam. There's many places, http://www.moranav6racing.com/
http://www.supersixmotorsports.com/
http://rpm-mustangs.com/cart/home.php
are 3 I can think of off the top of my head that are good. Alot of people I see go with the top 2 because they are race teams and good, but I don't know anything about the 3rd in thruth because I am still learning the scene if you will. Tell whoever you go with what you have and what you plan and aim for, they can get a good setup with the lobes, degrees, lift and ect. But also think about new roller rockers (1.73 is good), springs and in some cases pushrods. It'll bring some good power, but it'll cost some in money and labor.
http://www.supersixmotorsports.com/
http://rpm-mustangs.com/cart/home.php
are 3 I can think of off the top of my head that are good. Alot of people I see go with the top 2 because they are race teams and good, but I don't know anything about the 3rd in thruth because I am still learning the scene if you will. Tell whoever you go with what you have and what you plan and aim for, they can get a good setup with the lobes, degrees, lift and ect. But also think about new roller rockers (1.73 is good), springs and in some cases pushrods. It'll bring some good power, but it'll cost some in money and labor.
Similar threads
