Cams Install Video...

csledd · Apr 6, 2006

Figure I'd post this in the 4.6 section, if it needs to be moved then feel free

Here's the video consisting of pictures I took during the install and some stock video clips and new ones at the end. Fun times!

Approximately 6 minutes long and 40 MBs

http://www.csledd.com/ellie/cams/cams-install.wmv

helty · Apr 6, 2006

and i havent even watched it yet

stangGT97 · Apr 6, 2006

helty said:
and i havent even watched it yet

im with him on that one! i'll be watching this when i get home

Stang|ess · Apr 6, 2006

very nice vid, learned a lot from it. where did you get that valve spring from? how long did it take you guys?

csledd · Apr 6, 2006

We started on Friday night and finished it Tuesday. we didn't work full days though. Valvesprings took up 3 days time. The tool came from Snap On.

btw.. the video will be redited and changed.. I just found out there was a miss in the car.. possible was only running on 2 cylinders lol

blackink00 · Apr 6, 2006

VERY COOL. well it looked like the hardest part was the springs. can wait to do mine now.

DerekStangGT · Apr 6, 2006

csledd said:
We started on Friday night and finished it Tuesday. we didn't work full days though. Valvesprings took up 3 days time. The tool came from Snap On.

btw.. the video will be redited and changed.. I just found out there was a miss in the car.. possible was only running on 2 cylinders lol

ok, snap on. i was gonna ask you where you got that. do you have the torque specs? i was looking for them if you wouldnt mind. also, do you need a special tool to time the cams? or do you just line up the marks? never done cams driven by a chain. oh, and did you use a new gasket for the timing cover? how do the cams feel? tuned yet?

96BlueStangGT · Apr 6, 2006

Awesome, those pictures bring back memories. It looks like you knew what you were doing. Those valve cover gaskets look a lot better than what i put on mine. What kind were they?

Mustang4119 · Apr 6, 2006

Please come to my house and install engine work

csledd · Apr 6, 2006

DerekStangGT said:
ok, snap on. i was gonna ask you where you got that. do you have the torque specs? i was looking for them if you wouldnt mind. also, do you need a special tool to time the cams? or do you just line up the marks? never done cams driven by a chain. oh, and did you use a new gasket for the timing cover? how do the cams feel? tuned yet?

No specs, sorry. No special tool needed to time the cams.. you just have to get it all lined up with TDC (top dead center). I put new gaskets all around.. which they are Ford OEM I haven't got on it yet lol, so I dunno how it feels. I just got it finished yesterday and found out it had a miss in it.. 3 rubber boots had a cut or hole in them (our fault) so I had to replace those and it's much better now. I'm suppose to be getting a dyno tune on Saturday, but my tuner called me and said his dyno broke.. so it might not happen yet

jasonh_86 · Apr 6, 2006

I'm offended

timeless2 · Apr 6, 2006

Miss Cams, USA, FTW.

hotmustang331 · Apr 6, 2006

Ahh heres the thread . I was wondering if you were going to post one lol. Didnt watch this vid though, much too long for teh dailup...thanks for the shorty version lol.

Whats FTW? Guess its off to the defenition thread...

jasonh_86 · Apr 6, 2006

FTW = for the win

csledd · Apr 6, 2006

lol.. will since you're not watching it hot331 i thanked you at the very end

Stang|ess · Apr 6, 2006

hotmustang331 said:
Ahh heres the thread . I was wondering if you were going to post one lol. Didnt watch this vid though, much too long for teh dailup...thanks for the shorty version lol.

Whats FTW? Guess its off to the defenition thread...

Missing out in the credits

BTW, how much did the tool cost? I saw one at Sears for $15 today.

Updated "chop" via MSPaint.

helty · Apr 6, 2006

^^^best chop EVER!

timeless2 · Apr 6, 2006

Stang|ess · Apr 6, 2006

stangGT97 · Apr 6, 2006

haha that chop is hillarious

Cams Install Video...

Official Ovary Punching Member

some Ukrainian's enjoying a handjob via my credit

New Member

seeking cyber partner(s)

Official Ovary Punching Member

I missed a shift & stole Curt's money.

My package is in the mail!

Member

New Member

Official Ovary Punching Member

I

Vi Veri Veni Versum Vicus Vici

Active Member

I

Official Ovary Punching Member

seeking cyber partner(s)

Attachments

some Ukrainian's enjoying a handjob via my credit

Vi Veri Veni Versum Vicus Vici

seeking cyber partner(s)

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency