Cams
- Thread starter Jarrell
- Start date
00StangV6Coupe
Founding Member
Jarrell said:
Nope... I assume all is well, though I've been wondering as well. I've heard nothing bad about the company, but I'd still at least like acknowledgement that he got my money and was at least in the process of filling my order. At least let me know what was going on, you know? I'd suggest emailing him first saying that there were a couple of us that were wondering what was going on to see what he says. That way a bunch of us aren't emailing him, buggin him when there's probably no real problem. Then you can just post back on here to let the rest of us know and we won't have to ALL harrass him. Sound like a plan?
It's really funny how life works. I whent on the net today and low and behold I have an email from him saying that he recived my payment.
I've been talking to him through e-mail. I might have to go down there and visit his shop If I do I'll post what I see. But, he seems to
generaly want to help. I asked how much his shop would charge for a cam instalasion and he told me the price even though I specificaly
told him that I was going to do it myself. He even whent as far as If I needed any help or sugestions while performing the swap to talk to
him. Sounds like an great shop to me.
I've been talking to him through e-mail. I might have to go down there and visit his shop If I do I'll post what I see. But, he seems to
generaly want to help. I asked how much his shop would charge for a cam instalasion and he told me the price even though I specificaly
told him that I was going to do it myself. He even whent as far as If I needed any help or sugestions while performing the swap to talk to
him. Sounds like an great shop to me.
GREENBIOCH
Founding Member
I'm not really worried, living in Canada everything takes forever to get up here from the states. To get through customs, I think it sits there for a month or 2 before those lazy bastards start sending stuff through.
GREENBIOCH
Founding Member
BV Heads and ported intakes are next on the shopping list. The cam is just going into storage till I get all the pieces I need. I want to tear down the motor once only for this.
The cam I got matches the BV Heads, so yeah it isn't going in yet. But for the price of the cam, I had to buy it.
The cam I got matches the BV Heads, so yeah it isn't going in yet. But for the price of the cam, I had to buy it.
00StangV6Coupe
Founding Member
SpectorV said:
Well personally, I'll be doing the work myself. So I guess if I have the time, I'm not stupid. What do you think, genius?
00StangV6Coupe
Founding Member
SpectorV said:I will buy a 99 up heads/intake/cam set when they get some reseach done adn get them up to around 250rwhp~ like they should be
I realize that I'll get a bigger gain by doing mods to all the stuff you mentioned... however, I, like many others, realize I won't be able to afford ALL of that stuff at the same time for quite a while. So, rather than wait, I got the cam, etc. when it was cheap. I can do all the other stuff (if i even decide to do it) later on... unless I end up saving for my viper first. So I suppose I can wait for your 250rwhp... or I can have relatively cheap 220 n/a rwhp right now, while I wait for my stock 382.5 rwhp. Just a thought.
GREENBIOCH
Founding Member
I'm not going to ever buy diffrent heads.
All I'm going to do to the car performance wise is the cam, push rods,
springs, full exaust, pullies, chip, traction lock, and mabey a bigger
mass air and TB.
But, I'm not really sure that my car will need those Iteams for the
performance level I wish to achive with it.
My real performance car If my 5.0. I just wanna mess with the
better looking newer V6 that I use as my daily driver.
All I'm going to do to the car performance wise is the cam, push rods,
springs, full exaust, pullies, chip, traction lock, and mabey a bigger
mass air and TB.
But, I'm not really sure that my car will need those Iteams for the
performance level I wish to achive with it.
My real performance car If my 5.0. I just wanna mess with the
better looking newer V6 that I use as my daily driver.
00StangV6Coupe
Founding Member
SpectorV said:
I completely understand what you're saying. My point is that I may not even bother doing anything else to my car, depending on what kind of job I have in a couple months. I'm graduating college in less than a week so hopefully I'll be making more money now than the 4 grand I've been making over summers. Sure, with more money I could do more stuff, but I'm going to have to decide whether to leave the stang and move on to something that's fast to begin with. (Like a viper
) I won't be putting the cam in till at least the spring sometime so who knows, maybe by then I'll have money laying around and I'll spend it on new heads and some p&p'ed goods. Time will tell I guess.Similar threads
