• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Cams???

  • Thread starter Thread starter foxstang9050
  • Start date Start date Jan 2, 2006
F

foxstang9050

New Member
Aug 23, 2005
158
0
0
El Doarado Hills, CA
Jan 2, 2006
#1
  • Jan 2, 2006
  • #1
A questions about camshafts.... i know nothing about them... ive heard they help quite a bit and have been recommended to get em in my car... but it seems like everywhere i look they are only availabe for 5 speeds.. so this is my question.. is it possible to put cams in an AOD????
 

TheBocSez

New Member
Feb 3, 2004
652
0
0
Converse, TX
Jan 3, 2006
#2
  • Jan 3, 2006
  • #2
Camshafts can be put in any car, if you provide more info on your car, people can give better recommedations. There are several factors in choosing which one, if you need one at all. I am having a custom cam made for my AOD car right now.
 

timewarped1972

Member
Jun 17, 2004
642
0
16
mesa, az
Jan 3, 2006
#3
  • Jan 3, 2006
  • #3
they recomend certain cams for 5 speeds because 1, bigger cams usually sacrifice some bottom end which you don't want with a stock aod, or any auto for that matter, and 2 the lopier idle doesn't agree well with stock stall converters......the converter needs to be looser at idle so the car won't have a tendancy to die or stall in gear when stopped...
 
F

foxstang9050

New Member
Aug 23, 2005
158
0
0
El Doarado Hills, CA
Jan 3, 2006
#4
  • Jan 3, 2006
  • #4
I just have a couple bolt-ons... yea before i look into anything like cams or anything else im puttin in a shift kit.. stall converter.. and gears
 

bock

Founding Member
Jan 7, 2002
648
2
19
Montreal,Qc
Jan 3, 2006
#5
  • Jan 3, 2006
  • #5
If your engine is stock.The best cam for you is the stock one.
 
F

foxstang9050

New Member
Aug 23, 2005
158
0
0
El Doarado Hills, CA
Jan 4, 2006
#6
  • Jan 4, 2006
  • #6
so should i get heads and an intake manifold first?
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Jan 4, 2006
#7
  • Jan 4, 2006
  • #7
Man, this list comes in handy....


Your first mods should be as follows (my take):

In order of Priority
1) Subframe connectors (SFC's) full length ones are prefered for a stiff chasis
2) Gears: 3.73:1 or 4.10:1 seem to be the popular choices and should be the first modification
3) Buy a K&N panel filter (no CAI kit required) and put it in the stock box
4) Exhuast (headers, hi-flo cats, mufflers)
5) 3G alternator upgrade / electric fan
6) Larger MAF, TB (MAF cars from 1988 california only, 1989-1993)
7) Fix the weak brakes
8) Bumped timing (free mod) 10 Degrees is stock.

After those, it's pretty much up to you. There are plenty of Super Chargers or Heads, Cam and Intake packages to choose from. But at this point modification becomes very expensive so plan wisely.

Also, don't forget about the basic tune up which should include:
1) Changing all of the fluids (oil, coolant, trans, rear end, brake and some of the power steering)
2) Plugs: (non-platnum type) Autolite or Motorcraft
3) Oil filter: Motorcraft or equivalent (not FRAM)
4) Air filter: see above
5) Plug wires: Ford Motorsport (FRPP) 9mm units are great
6) Cap / Rotor
7) Oxygen sensors


Note: I leave U/D pullies off of the list as a first modification. Sometimes the gains obtained are usually offset with the charging issues that occur.
 

bock

Founding Member
Jan 7, 2002
648
2
19
Montreal,Qc
Jan 4, 2006
#8
  • Jan 4, 2006
  • #8
if yopu want easy and cheap mod that you will feel the difference:

Gears.

headers.

pulleys.
 

88Stangboy

Banned
Dec 12, 2005
342
0
0
Greenville, SC
Jan 4, 2006
#9
  • Jan 4, 2006
  • #9
Do that list, it works. And a bigger cam in a stock engine is a waste of money, its like you trying to breath through a drinking straw. Get heads, exhaust, intake and a converter to match along with some rear gears. Then worry about getting cam.
 
F

foxstang9050

New Member
Aug 23, 2005
158
0
0
El Doarado Hills, CA
Jan 4, 2006
#10
  • Jan 4, 2006
  • #10
well i already got a full exhaust, pulleys are comin in about a week, and gears are sittin in the garage(need help with install and i dont want to spend a fortune gettin them done so some help would be nice)
 
You must log in or register to reply here.

Similar threads

9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
720
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
594
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
D
66 Coupe Progress Thread
  • DTCRAWLEY
  • Apr 19, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
43
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Jun 17, 2026
DTCRAWLEY
D
P
Air Fuel ratio bung location.
  • Praetorious
  • Feb 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 11, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?