can someone give me an estimate on horsepower with these bolt ons...

killer5.0

5 Year Member

Oct 8, 2009

725

83

59

Jan 31, 2010

#1

• Jan 31, 2010

• #1

i have a 93 gt...here is a list of mods that are on the car...these were already on the car when i bought them so if something looks like it would run better with something else in its place...feel free to let me know...

3:73 gears
BBK cai (fendermount)
BBK FP regulator
BBK headers
GT40 upper/lower
F303
70mm throttle body
70mm MAF
200a alternator (dont know if this matters or not)
H or X pipe with borlas that dump before axle (i cant remember which one and i cant look under my car b/c its too low..lol

i may be forgetting something but i think thats most of it.

 

tannerc91gt

This last 25% is foreign territory at this point

Founding Member

Nov 29, 1999

4,392

2,967

234

Indiana

Jan 31, 2010

#2

• Jan 31, 2010

• #2

235 wheel

If its a 5 speed, less for an auto.

 

foxmustangman

Member

Jun 20, 2007

196

1

16

Idaho

Jan 31, 2010

#3

• Jan 31, 2010

• #3

250 if you're lucky. Most of those mods don't do much in the short run.

 

killer5.0

5 Year Member

Oct 8, 2009

725

83

59

Jan 31, 2010

#4

• Jan 31, 2010

• #4

what would that be at the flywheel? and also what should my next power mods be...thanks

 

tannerc91gt

This last 25% is foreign territory at this point

Founding Member

Nov 29, 1999

4,392

2,967

234

Indiana

Jan 31, 2010

#5

• Jan 31, 2010

• #5

You still haven't specified what type trans?

I'd say 270 crank on a good day. Keep in mind these cars put down like 190-200 wheel stock in 5 speed form

 

foxmustangman

Member

Jun 20, 2007

196

1

16

Idaho

Jan 31, 2010

#6

• Jan 31, 2010

• #6

Well most of those are parts to help the engine breathe easier. So I would get some new heads, then those other mods would actually come into play. Most likely a different intake as well.

 

matador91

Active Member

Feb 1, 2007

107

31

38

Bothell

Feb 1, 2010

#7

• Feb 1, 2010

• #7

I would also get a better cam if you get heads.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,265

17,952

224

Massachusetts

Feb 1, 2010

#8

• Feb 1, 2010

• #8

+1 on ditching the F cam

 

B

bgoins

Member

Feb 23, 2009

130

0

16

hampton roads, virginia

Feb 1, 2010

#9

• Feb 1, 2010

• #9

Get some aluminum heads. F cams r good for turbos if ur thinking of going that route eventually

 

Dino Dino Bambino

15 Year Member

Jun 13, 2007

1,672

89

79

Cyprus

Feb 1, 2010

#10

• Feb 1, 2010

• #10

killer5.0 said:

what would that be at the flywheel?

Click to expand...

I'd say you have about 280 flywheel HP or 240rwhp (manual tranny).

killer5.0 said:

and also what should my next power mods be...thanks

Click to expand...

Better heads.

 

killer5.0

5 Year Member

Oct 8, 2009

725

83

59

Feb 1, 2010

#11

• Feb 1, 2010

• #11

what do good heads run? also 5 speed.

 

tannerc91gt

This last 25% is foreign territory at this point

Founding Member

Nov 29, 1999

4,392

2,967

234

Indiana

Feb 1, 2010

#12

• Feb 1, 2010

• #12

$12-1500 for a nice set of aluminum AFRs or TFS heads