Cant wait! Drag radials on the way!

04MystiCobra

New Member

Jan 29, 2004

12

0

0

Corpus Christi, TX.

Aug 13, 2007

#21

• Aug 13, 2007

• #21

If you get a chance bring it by my place sometime this week. We'll take a look at that and other stuff. I'm only a few exits away from Lewis.

 

M

mtpruden

New Member

Jun 18, 2007

0

0

0

Bangor, WA

Aug 14, 2007

#22

• Aug 14, 2007

• #22

when that thing gets sorted out with clutch and the DR's with spray...
dang son.
you is gonna be rippin it.


fo sho.
(ghetto moment.)

 

89OctaneStang

New Member

Aug 1, 2007

12

0

0

Ft Lewis, WA

Aug 14, 2007

#23

• Aug 14, 2007

• #23

04MystiCobra said:

If you get a chance bring it by my place sometime this week. We'll take a look at that and other stuff. I'm only a few exits away from Lewis.

Click to expand...

Hows Thursday sound to you?? I'll get off work around 4'ish.

 

89OctaneStang

New Member

Aug 1, 2007

12

0

0

Ft Lewis, WA

Aug 15, 2007

#24

• Aug 15, 2007

• #24

Hey, we still on for tomorrow? Just ordered my window switch, same one you got. The original owner also sent me the Bosch wiring harness and a few other parts that came with the NOS setup. So this should be fairly easy to do and maybe we could do this sometime next week so I can make a pass with it on the 24th. Let me know about tomorrow.

 

04MystiCobra

New Member

Jan 29, 2004

12

0

0

Corpus Christi, TX.

Aug 16, 2007

#25

• Aug 16, 2007

• #25

Yep. Just give me a call.

 

89OctaneStang

New Member

Aug 1, 2007

12

0

0

Ft Lewis, WA

Aug 17, 2007

#26

• Aug 17, 2007

• #26

Here are the code results for codes 11 & 81. Whats your opinion

www.corral.net/20anngt/eec.htm

 

Attachments

• EEC IV Codes_16 Aug 07.doc

  23.5 KB · Views: 116

04MystiCobra

New Member

Jan 29, 2004

12

0

0

Corpus Christi, TX.

Aug 17, 2007

#27

• Aug 17, 2007

• #27

No worries. I remember anything with a 1 is good, 1, 11, 111.
How did it go on the way home?

 

yello05

New Member

Dec 14, 2004

0

0

0

Starbucks!

Aug 17, 2007

#28

• Aug 17, 2007

• #28

89OctaneStang said:

Here are the code results for codes 11 & 81. Whats your opinion

www.corral.net/20anngt/eec.htm

Click to expand...

That list of EEC IV codes is not 5.0L specific.
11 is a pass code and 81 is for the secondary air- meaning the thermactor assembly.

You are getting the 11 because the pcm doesnt see a problem in KOEO, but when running it has stored a continuous code 81 for the secondary air not diverting. This will not affect driving or set a check engine light so ignore it.

 

89OctaneStang

New Member

Aug 1, 2007

12

0

0

Ft Lewis, WA

Aug 17, 2007

#29

• Aug 17, 2007

• #29

Cool. It drove great all the way home.. No issues at all. And it feels like I have a better throttle response. Would anything we did have made that possible or am I feeling things that aren't really happening?

 

04MystiCobra

New Member

Jan 29, 2004

12

0

0

Corpus Christi, TX.

Aug 17, 2007

#30

• Aug 17, 2007

• #30

Adjusting the idle and the TPS is why. Since your thottle stop was backed all the way out your idle was so low that the Idle Air Control Valve just couldnt allow enough air into the motor because the throttle was closed all the way. Not to mention you have an aftermarket cam installed. When the idle is that low there almost always is a delayed response or hesitation on the initial application of throttle.
Since your TPS was set over 1 volt when the t-body was closed the motor was running overly rich, making the low idle setting even worse. Must have been a crappy thing to deal with all the time.
Everything we did yesterday will give the results you're feeling.

 

89OctaneStang

New Member

Aug 1, 2007

12

0

0

Ft Lewis, WA

Aug 17, 2007

#31

• Aug 17, 2007

• #31

And your help and patience in teaching me the "Basics" is greatly appreciated. I've been looking at some intakes as we discussed yesterday and here's what I've found that I think would work good for the car.. Whats your opinion of which one you think would best suite a pretty fast (400'ish HP goal) street/drag setup?

http://performanceparts.com/part.php?partID=282259

http://performanceparts.com/part.php?partID=135502

http://performanceparts.com/part.php?partID=201333

 

04MystiCobra

New Member

Jan 29, 2004

12

0

0

Corpus Christi, TX.

Aug 17, 2007

#32

• Aug 17, 2007

• #32

I'm partial to the Systemax intake as thats what I ran on my car. Hard to beat when it comes to flow #s. These days most intakes work pretty well. I dont have any experience with the BBK intake. The Edelbrock is pretty good too.
In my opinion you want to stay away from intakes that make power in the upper rpms. Sure you can run them but if you're driving it on the street as a daily driver and you're not planning on spinning the motor to 7,000+ rpm you end up losing/ sacrificing the lower end power that you need for high end power that you'll only use a fraction of the time. You really want a long runner, torque producing intake for a daily driver. The horsepower diff isn't worth the loss of power down low.
Check your pm.

 

89OctaneStang

New Member

Aug 1, 2007

12

0

0

Ft Lewis, WA

Aug 18, 2007

#33

• Aug 18, 2007

• #33

Gotcha! Thanks for the advise...

Hey, I got my MSD box in ALREADY!!!! I just ordered it two days ago from performanceparts.com and it was on my doorstep today! Now thats fast service... So maybe sunday, if your not busy, we could hook it up. What do you say?

 

white 89 GT

Member

Apr 3, 2003

281

0

17

Tacoma

Aug 18, 2007

#34

• Aug 18, 2007

• #34

stock50LX said:

Stock tires are 26 inches tall so you'll need to recompute. Trust but verify regarding the gears. I cannot remember what tires you have but I am sure I would have noticed a 24 inch tall tire. You cannot trust the accuracy of a factory tach. Even a cheap ($50.) aftermarket tach will be an improvement over the factory one.

Click to expand...

I think his tires were somewhat small but can`t say for shure.
The AOD is a pig without at least 3.73`s and after changing the timing the 60' dropped to 2.15 which is where mine was so im inclined to think it has 3.73`s
We need to put the 4r gearset in and he will drop his 60' to 1.9`s