Cap for Header(EGR) & O/r X pipe (Air Tube)

FordStang

Founding Member

Sep 19, 2002

862

1

0

Orange Park, FL

Mar 3, 2004

#1

• Mar 3, 2004

• #1

Im not using any EGR oor Emission stuff so im just wondering what everyone used to block off on the Header and on Mid pipe Tube (used to connect to the Air Tube). And i dont really wana weld either of them shut just incase i ever need to use anyting of it again. Any ideas or pics would be great so i have any idea what your talking about.

 

5.0 from 95

Founding Member

Nov 6, 2001

738

0

0

Emory, TX

Mar 3, 2004

#2

• Mar 3, 2004

• #2

I took a piece of hose and clamped it to the x-pipe inlet and then clamped a brass plug about 4 inches away from that. I don't know on the EGR. I would like to know myself.


Paul

 

95snoozer

Active Member

Dec 14, 2002

2,572

1

48

RCR

Mar 3, 2004

#3

• Mar 3, 2004

• #3

ford sells the piece for the header, its dirt cheap

and the cap for the h I used a rubber cap made by "STOP" you can get at oreileys or autozone.... it was 5/8s or something around there

 

1105

I AM the random post master...bow down

May 3, 2003

3,841

0

0

Daytona Bch, FL

Mar 3, 2004

#4

• Mar 3, 2004

• #4

I used a penny to cap off the header, but you're going to have to cut the EGR tube to get one of the fittings off, then stick a penny in it and tighten it back down.

 

FordStang

Founding Member

Sep 19, 2002

862

1

0

Orange Park, FL

Mar 3, 2004

#5

• Mar 3, 2004

• #5

Thanks guys ill contact Ford for the header Cap and ill Call AutoZone and see if those Guys know anything(should be interesting to here what they say)