Cap, rotor, & wire help

[willys1]

Guys I have a screamin deamin ign. system and are in need of cap,rotor and wires again. Im sick of paying a 100 bucks for live wires,but stock wires wont cut it,sparks to hot for them..Any suggestions on wires that can handle the extra spark but arent as expensive as "Live Wires"..Also a cap & rotor to match. Thanks for any suggestions!!

 

[Reed]

I think FRPP 9 mm wires would do fine, they're about half the price of live wires.
http://www.autopartswarehouse.com/p...9&modelid=111&year=1993&partid=4&brandid=1829
Accel wires might be good too. They sell matching caps and rotors as well.

 

[willys1]

I hear Taylor makes some good ones I was hoping to get the name of them. 04Sleeper you out there? (Kevin)

 

[Rick 91GT]

The Live Wires are nice I use them as well but Moroso and Taylor also make a very good wire, the better wires are all in the $100 range however. A MSD, ACCEL or stock FORD cap and rotor are fine.

 

[willys1]

The Live Wires are nice I use them as well but Moroso and Taylor also make a very good wire, the better wires are all in the $100 range however. A MSD, ACCEL or stock FORD cap and rotor are fine.

Sup Rick! Yeah but if the Taylors are just as good (stock motor) then saving 60 bucks isnt a bad idea!

 

[68torinogt]

i would go with taylors and they offer lots of colors i know lots of people that run them and they have several options.

 

[68torinogt]

and cheaper

 

[LEE93COBRA]

Are you replacing these items very often? Good wires should last you many, many miles