• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Carb swap

  • Thread starter Thread starter puron
  • Start date Start date Dec 1, 2005
Prev
  • 1
  • 2
First Prev 2 of 2

69Rcode_Mach1

Active Member
Apr 20, 2004
1,473
1
37
Salt Lake City, Utah
Dec 6, 2005
#21
  • Dec 6, 2005
  • #21
Awesome glad you got it done!!!! D. Hearne know his stuff. A 500 will get you awesome performance, the 4 barrel may have given you better mileage that is all. Enjoy it nothing better than more horses freed up under the hood.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Dec 6, 2005
#22
  • Dec 6, 2005
  • #22
69 you need to get some gears. have you taken your car to the track?
 

69Rcode_Mach1

Active Member
Apr 20, 2004
1,473
1
37
Salt Lake City, Utah
Dec 6, 2005
#23
  • Dec 6, 2005
  • #23
I know I need gears, Detroit Locker, and some magnum 500's so I can mount some 275's on the back as opposed to the measly 225's I have now. I haven't driven the car yet, I am assembling it after having some trouble, should be done a little after new years. Ronstang has a similar combo and runs over 400rwhp and almost breaks 10's.
 
D

D.Hearne

New Member
Sep 29, 2000
11,730
6
0
south louisiana
Dec 6, 2005
#24
  • Dec 6, 2005
  • #24
puron said:
Well, theory aside, I got my carb and installed it today, here is my feedback! The Holley 2300 fit exactly in place of my Autolite 2100, Holley even provides a new base gasket. I had to mess with the fuel line, went to NAPA and got a 90 degree 3/8 fitting to attach new fuel line and an inline filter to. Strange Holley doesnt supply a fuel line connection. The linkage hookup required fabbing up a new retaining clip for the throttle rod, the old one wouldnt fit and the Holley one didnt work either. I noticed my pedal wouldnt open up the carb all the way, found my old pedal linkage had been tromped on so many years the pedal needed to be bent up from the floor a bit. I left the choke wide open and didnt add a choke cable, being in Myrtle Beach SC I dont have warm up problems anyway. The car fired up and idled pretty well right off the bat. I installed a new Holley chrome air cleaner and a vented oil fill cap and took it for a spin, and found at least 30 horsepower has been added. Throttle response is crisp, no bogging at all. It burns rubber from a dead stop, chirps the tire going into second (C4 trans) and has strong punch stomping on it at 60. I ran it up to 100 and it pulled strong all the way. Huge improvement over the old Autolite, and the carb, air cleaner and oil cap cost 280 bucks from Jegs. I dont think id get that much more from a 4 bbl carb in this tune so I am real happy with this set up. Thanks to D Hearne for his advice and everybody else here too.
Click to expand...
:SNSign: :Teh-Win: Glad to see someone else learn first hand from what I've experienced. Yea, I agree with the others that a 4 bbl will get you this and mileage too, but if you drive sensibly you can also get mileage from the 500 as well. The part that affects it most here is that 50 cc accellerator pump.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
793
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
S
Requesting Guidance for 306 motor swap - Fuel? - SD? MAF?
  • So_Flo
  • Jul 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 4, 2026
Mcmahst
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
For Sale 94 Cobra 408w AOD Project For Sale
  • Labora
  • Oct 11, 2024
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
1K
SN95 Mustangs For Sale (1994-04) Apr 7, 2025
Labora
Rebuilding a Motorcraft/Autolite 2100 - a carb newbie needs advice
  • 02 281 GT
  • Jan 30, 2022
  • Classic Mustang Specific Tech
Replies
1
Views
2K
Classic Mustang Specific Tech Jan 31, 2022
horse sence
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?