CE Light After Installing Off-Road Pipe?

[tjh566]

Whats up with that, i thought our year cars wouldnt do that? I put the off-road pipe on drove it for a few miles and bam the light comes on, Turn off the car and back on, its gone and a few miles of driving and its back.

 

[Stanger007]

Pull the code. Are the O2's plugged in?

 

[blksn955.o]

get the code read and see what its for...it could just be really crappy timing and something just went out or bad o2's, bad egr, tons of things.

 

[tjh566]

Yeah they are plugged in, I took it to autozone and advance auto to get a code scan and they said they couldnt do it because its not the newer computer from the 1996 and up cars

 

[HISSIN50]

Do you have a paperclip? If not, grab a berret from your girlfriend's hair when she's not lookin and use it to pull codes.

Make sure none of the O2 wiring was hurt during the R/R.

Good luck.

 

[94-302-vert]

did you put more anti-seize on the O2s? you may have fouled one of them.

 

[88stangnut]

did you put more anti-seize on the O2s? you may have fouled one of them.

That can happen? I just put on a Catted Bassani X and my CE light turns on and shuts off 2-3 times a hour while driving. My friend did the O2's and he said it would help from siezing on. Which took use alot of Map gas to get the ones that were for a fox in there out!.. ****!.. if thats what it did that sucks!.. I re did all the EGR piping and everything too

 

[HISSIN50]

I use neverseize on the O2's threads and havent had an issue with it affecting the readings. Seems to me that as long as you just put it on the threads, you should be fine.

 

[tjh566]

Do you have a paperclip? If not, grab a berret from your girlfriend's hair when she's not lookin and use it to pull codes.

Make sure none of the O2 wiring was hurt during the R/R.

Good luck.

Care to elaborate some more on this?

 

[HISSIN50]

Care to elaborate some more on this?

Not really.





























Just kidding.

See here for assistance. Do note that the test connector on a 94-95 GT is ON THE PASSENGER SIDE OF THE ENGINE BAY, BETWEEN THE FIREWALL AND BACK OF THE STRUT TOWER.

Good luck.

 

[gt96stanggt]

Yeah they are plugged in, I took it to autozone and advance auto to get a code scan and they said they couldnt do it because its not the newer computer from the 1996 and up cars

BS like 100 stores told me that but i later found out they have a obd1 that is made for ford/licoln/mercury.... talk to someone that has been tehre for a while or a manager or something