• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Forced Induction centrifugal supercharger timing question

  • Thread starter Thread starter bdep73
  • Start date Start date Nov 16, 2012

bdep73

Member
Jan 15, 2012
31
1
8
hartford, CT
Nov 16, 2012
#1
  • Nov 16, 2012
  • #1
Hey guys I was hoping I could get a few of your opinions on timing with a centrifugal supercharger. I recently installed a methanol injection kit on my 1990 5.0 mustang. the car has a Novi 2000 set up for 10 lbs of boost. After installing the meth kit I was playing around with my timing and I found that the car ran well two different ways. The first way was 12 degrees initial timing with 5 degrees being pulled out of the total timing under full boost. The second way was 17 degrees initial timing and 10 degrees being pulled out of the total timing under full boost. My question is this - which is better, more initial timing with more timing being pulled out of the total timing under full boost or less initial timing with less timing being pulled out of the total timing under full boost.

My opinion with my perticular setup is it's better to have more initial timing pre boost when you need it and under full boost when timing isnt as important pull more out of the total timing. The thing is as I said before the car ran well both ways and without a dyno it's hard for me to really know which way is gving me the most power.

I was hoping some of you guys have already gone through this same issue and were able to use a dyno so you are not just guessing like I am. As always any help would be greatly appreciated.
 
You must log in or register to reply here.

Similar threads

Forced Induction Total Timing under boost
  • Dontknowchit
  • Aug 27, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
315
Fox 5.0 Mustang Tech Aug 28, 2025
Dontknowchit
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
814
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Forced Induction Bypass valve backwards?
  • Dontknowchit
  • Jun 25, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
335
Fox 5.0 Mustang Tech Jun 29, 2025
JD1964
S
5.0 Rebuild
  • smittys7up
  • Nov 29, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
545
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 20, 2025
Noobz347
S
Timing chain, guides and tensioner installation (Possible orientation in Intake Stroke)
  • StallionMax
  • Sep 21, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
382
SN95 4.6L Mustang Tech Sep 24, 2025
StallionMax
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?