• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Check Off list for new motor

  • Thread starter Thread starter Black 93 Fox
  • Start date Start date Jun 23, 2005

Black 93 Fox

Active Member
Jun 1, 2003
1,995
0
49
Vancouver,Washington
Jun 23, 2005
#1
  • Jun 23, 2005
  • #1
Alright I think I have everything I need but just to make sure add what you think i need.

New Pistons
New Rings
Block bored
new oil pump
all gaskets
Trick Flow track heat heads
Trick Flow track heat cam
Trick Flow track heat intake
push rods
roller rockers
lifters
valve covers
throttle body
bigger injectors
bigger fuel pump
FPR
all new bearings
motor and tranny mounts
new timing cover and water pump bolts
head bolts
king cobra clutch
 

stangnutlx

New Member
May 24, 2005
242
0
0
Coventry, RI
Jun 23, 2005
#2
  • Jun 23, 2005
  • #2
what size engine?
ditch the camshaft and get a custom
 

Black 93 Fox

Active Member
Jun 1, 2003
1,995
0
49
Vancouver,Washington
Jun 23, 2005
#3
  • Jun 23, 2005
  • #3
306 i already bought and ordered the cam shaft it comes in a kit with the heads and intake and everything else for the top end.
 

stangnutlx

New Member
May 24, 2005
242
0
0
Coventry, RI
Jun 23, 2005
#4
  • Jun 23, 2005
  • #4
ive heard that kit is dissapointing
 

Black 93 Fox

Active Member
Jun 1, 2003
1,995
0
49
Vancouver,Washington
Jun 23, 2005
#5
  • Jun 23, 2005
  • #5
Everyone I know that has it loves it great kit for the price.
 

stangnutlx

New Member
May 24, 2005
242
0
0
Coventry, RI
Jun 23, 2005
#6
  • Jun 23, 2005
  • #6
my buddy has the same kit he was hoping for more than it gave him but it could be his car. probably a chance you may have better luck than he did
 

Black 93 Fox

Active Member
Jun 1, 2003
1,995
0
49
Vancouver,Washington
Jun 23, 2005
#7
  • Jun 23, 2005
  • #7
What did he make with what mods
 

stangnutlx

New Member
May 24, 2005
242
0
0
Coventry, RI
Jun 23, 2005
#8
  • Jun 23, 2005
  • #8
i think he barely cleared 280rwhp
 

Thenemesis

Member
Nov 16, 2004
321
0
17
chuckletown, sc
Jun 23, 2005
#9
  • Jun 23, 2005
  • #9
ive heard that kit is awesome monster kit and then ive heard its crap.. it might be what people use as supporting mods.. as long as you have everything else upgraded im sure you will be at or past what they say it made on the dyno..
 

Black 93 Fox

Active Member
Jun 1, 2003
1,995
0
49
Vancouver,Washington
Jun 23, 2005
#10
  • Jun 23, 2005
  • #10
I already have pulleys, full exaust, shifter, gears, cold air intake, 76 c&l, 9mm spark plug wires, and probaly a few other things i am forgetting. Im wondering what it will make on the dyno. I am also gona get a electric fan.
 
M

my$100project

New Member
May 12, 2005
208
0
0
Jun 23, 2005
#11
  • Jun 23, 2005
  • #11
I can think of a few things off of the top of my head. There items ore optional, in my opinion worth changing while you have the engine apart.
Timing Chain-water pump-
seen bolts where listed but not items themselves.

Also I would recommend buying a fel-pro One peice Oil Pan Gasket. The ones in the kits tend to leak. $30.00 for a quality one peace rubber (polyeurothain, and some metal, I think) pan gasket is well worth the investment to save time in the future.
Thermostat.

Also I noticed you had listed you already bought the bearings. I noticed you bored the block, however did you check the crankshaft for scratches, taper, etc? You may want to get it turned .010 and get some oversized bearings?? Just a thought.
Also with the larger heads and intake maybe a 5 angle valve job? The local Machine shops charge around $50 per head.
 

Black 93 Fox

Active Member
Jun 1, 2003
1,995
0
49
Vancouver,Washington
Jun 23, 2005
#12
  • Jun 23, 2005
  • #12
I have a new water pump and the crank has been ground. The bottom end is all set. I am gona get the one peace gasket. The timing chain comes in the top end kit.
 
M

my$100project

New Member
May 12, 2005
208
0
0
Jun 23, 2005
#13
  • Jun 23, 2005
  • #13
double post
 
B

bcmbcmbcm

20+ Year Stangneter
Jan 29, 2003
455
0
16
Jun 23, 2005
#14
  • Jun 23, 2005
  • #14
clutch fork and pilot bushing

to name a few,
why not upgrade alt NOW while out of the car? LESS WORK in the long run

and don't forget good paint for the engine- seen two BRAND NEW 302s go in with piss-poor paint to flakw off and rust an otherwise nice engine, EASILY OVERLOOKED
 

Black 93 Fox

Active Member
Jun 1, 2003
1,995
0
49
Vancouver,Washington
Jun 23, 2005
#15
  • Jun 23, 2005
  • #15
bcmbcmbcm said:
to name a few,
why not upgrade alt NOW while out of the car? LESS WORK in the long run

and don't forget good paint for the engine- seen two BRAND NEW 302s go in with piss-poor paint to flakw off and rust an otherwise nice engine, EASILY OVERLOOKED
Click to expand...


I got 1200* ceramic flat black paint think that will hold up?
 
You must log in or register to reply here.

Similar threads

Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
748
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
623
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
412
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
My next project , a 428 build!
  • horse sence
  • Jul 29, 2026
  • Classic Mustang Specific Tech
  • 9 10 11
Replies
216
Views
5K
Classic Mustang Specific Tech Thursday at 6:45 AM
DadLife0724
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?