choices with 3.73's help!

jmd2914

Founding Member
Sep 6, 2002
937
0
0
Napa, California
alright, one of my buddies just pulled some 3.73's from a 99 eddie bower explorer, and he said he would trade me them for a pair of 40 series flows i had layin around. he said i will need new axle shafts though. my questions are ( which is why i put this in tech) do i need new axle shafts? do i need a new speedo gear? what all would i need to do this swap? and is this a good trade? my flows for his gears? give me your honest opinoins
 
Are you getting just the gears or the whole inner part of the differential? If you are getting just the gears you don't have to worry about new axle shafts. You will definately need a new speedo gear but that is cheap and easy.
 
jmd2914 said:
alright, one of my buddies just pulled some 3.73's from a 99 eddie bower explorer, and he said he would trade me them for a pair of 40 series flows i had layin around. he said i will need new axle shafts though. my questions are ( which is why i put this in tech) do i need new axle shafts? do i need a new speedo gear? what all would i need to do this swap? and is this a good trade? my flows for his gears? give me your honest opinoins

Explorer traction-lok's are all 31 spline axle. Mustang 8.8's till '04 are all 28 spline axle. If you are getting the entire differential, you will need new axles. If just getting the gears, you need only the speedo gear.
 
jmd2914 said:
ok i think i am getting the whole diff, but if i do get the whole diff cant i just pull the gears out and swap them into my diff? or would that be a bad idea? p.s this is a good deal on my part right?

If he gives you the whole diff, you can just swap the gears to your diff. THe gears are 100% interchangeable. It's not a bad idea at all. It's what I would do. Then I'd sell the 31 spline traction-lok on eBay for about $100-$150 bucks. Should be worth that I'd think.

To me this is a great deal for you. He's giving you gears and potentially about $100 cash if you sell the 31 spine diff for a pair of mufflers. I'd do this parts exchange in a flash.
 
ok, i think im gonna go ahead and trade even if it is just the gears cuz im using 3.08's right now. and i know this is going to be a dumb question, but could someone explain " limited slip " to me, i have a general idea, but im kinda curious to lear more. ( did search didnt find anything) and where exactly is my speedo gear?
 
Don't hesitate on it. I would definately do it. I would just trade the ring and pinion to your car and sell the explorer traction lock on ebay and make more money. Speedo gear is in the side of the tranny connected to the speedo cable. It is a snap to change. Limited slip means when you are going through a turn or curves one wheel is gonna turn faster than the other where as with a locker both wheels turn the same making it a pain as well as getting some tire squeal. Limited sliip is very streetable and a locker is alot less streetable.
 
bubba-dough said:
Don't hesitate on it. I would definately do it. I would just trade the ring and pinion to your car and sell the explorer traction lock on ebay and make more money. Speedo gear is in the side of the tranny connected to the speedo cable. It is a snap to change. Limited slip means when you are going through a turn or curves one wheel is gonna turn faster than the other where as with a locker both wheels turn the same making it a pain as well as getting some tire squeal. Limited sliip is very streetable and a locker is alot less streetable.

Right idea bu tyou terminology will confuse. A limited slip or traction-lok (often called a locker) is the same thing.

Basically a traction-lok has a clutch pack and some springs in the differential. When you turn, the force of the turn with the inside tire turning a smaller arc than the outside cause the clutches to slip and lets the car turn quietly and smoothly.

With a Detroit Locker (anoher type of locker diff) their are gears that ratchet and allow the inner and outer tires to turn at different speeds. Detriot's are louded and make a clunking noise when they operate. Most people don't like the noise cause it "sounds bad" but it's how they work.

A spool, like the one my brother just put in his V8 Ranger, locks both axles together eliminating the differential completely. At all speeds around corners both tires will turn the same ammount.

In a high enough powered vehicle the locker type diffs can't keep the pwoer equally distributed and you get bad things. My brother for example, just twisted an axle and was fighting with the truck wanting to pull left then right as the diff struggled to control the power from the engine and the traction he was getting. Spool eliminates this. Now he needs new axles. Too much power for factory axles is a good problem to have.