• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum

clutch blew up with 7000 miles

  • Thread starter Thread starter 98svtconvert
  • Start date Start date Oct 21, 2004
9

98svtconvert

New Member
May 26, 2004
85
0
0
va beach, va
Oct 21, 2004
#1
  • Oct 21, 2004
  • #1
my clutch blew up with only 7000 miles on it and 8 passes down the track. haven't been to the track in about 2 months and all of the sudden during normal driving the king corba clutch let loose. the entire pad on the pressure plate side seperated from the disk. i don't have the receipt and i put it in my self so i know the install was correct. is there any way i can get anything back from ford or am i just going to have to eat this one. the pads arent worn. they just came apart. i am putting in a center force. anyone thinking about getting a new clutch, stay away from the king cobra. alst i looked at the disk and it looks exactly the same as a stock disk. does ford use the same disk with the king cobra kit and just change the pressure plate? any help is great. thanks.
 

tygr1

New Member
Jun 16, 2004
318
0
0
SoCal
Oct 21, 2004
#2
  • Oct 21, 2004
  • #2
Wow...at least u got 7k out of yours. Mine lasted 2 months! Broke it in, made a few 1/4 mile runs, came unbonded on the fwy one night.

Just like yours, the disc surface was fine...just came apart!

Installed a CenterForce dual friction 700 miles ago and it is AWESOME!!

King Cobra clutch does NOT like power shifts! Waste of my time and money.
 
C

chuckystang

New Member
Jul 12, 2004
217
0
0
Oct 21, 2004
#3
  • Oct 21, 2004
  • #3
What is the king cobra clutch, is it different than the stock clutches in the 99-01 cobras??
 

tygr1

New Member
Jun 16, 2004
318
0
0
SoCal
Oct 21, 2004
#4
  • Oct 21, 2004
  • #4
chuckystang said:
What is the king cobra clutch, is it different than the stock clutches in the 99-01 cobras??
Click to expand...


More holding power, like 2400lbs vs 1400lbs or somewhere in that range. Basically, just a heavy duty stock replacement made by Valeo.

I would replace stock WITH stock if the King Cobra were my only other choice.
 

KnRs88

Founding Member
Jul 1, 2002
189
0
0
Chicago suburb
Oct 21, 2004
#5
  • Oct 21, 2004
  • #5
I think your just going to have to eat the cost. I sure hope my King Cobra lasts, I just installed mine a couple months ago, and took it to the track with 250 miles on her, and made about ten passes. Now it has about 2,800 miles on it. The clutch doesn't really feel any stronger than stock. I wish I would have just forked up the money for the centerforce.
 

5.0's 4 ever

The #1 Stunna
Founding Member
Jan 22, 2000
5,794
0
76
Orlando, FL
Oct 21, 2004
#6
  • Oct 21, 2004
  • #6
My ford racing king cobra clutch lasted 3k miles till the clutch disc came apart. I personally have seen two other 96-98s cobras with the same clutch come apart in a matter of a few thousand miles. As far as I can tell the stock clutch on a 96-98 cobra is a "king cobra clutch", the numbers match right up. I think valeo's has had huge quality problem with building these 10.5" clutch discs lately. It just too common to hear about people having the same failure now.
For a clutch you might want to look into a McLeod. I run one in my 96 and really love it. I upgraded to an 11" pressure plate and clutch setup at the sametime.
 
B

blk32V

New Member
Apr 10, 2003
130
0
0
Portage, IN
Oct 21, 2004
#7
  • Oct 21, 2004
  • #7
Whats the deal with the google man at the end of every thread.
 
9

98svtconvert

New Member
May 26, 2004
85
0
0
va beach, va
Oct 25, 2004
#8
  • Oct 25, 2004
  • #8
KnRs88 said:
I think your just going to have to eat the cost. I sure hope my King Cobra lasts, I just installed mine a couple months ago, and took it to the track with 250 miles on her, and made about ten passes. Now it has about 2,800 miles on it. The clutch doesn't really feel any stronger than stock. I wish I would have just forked up the money for the centerforce.
Click to expand...

you do know that there is about a 500 mile break in period before hard driving. i hope yours lasts.
 

KnRs88

Founding Member
Jul 1, 2002
189
0
0
Chicago suburb
Oct 25, 2004
#9
  • Oct 25, 2004
  • #9
98svtconvert said:
you do know that there is about a 500 mile break in period before hard driving. i hope yours lasts.
Click to expand...


Yea I know, but my friends rented the track for the day (once a year thing), and I could not miss that.
 
You must log in or register to reply here.

Similar threads

For Sale Borg Warner WC T5, Stock Bell Housing, RAM Clutch Set, Double Hump Cross Member, & Pro 5.0 Shifter
  • AeroCoupe
  • Aug 9, 2025
  • Drivetrain Parts
Replies
1
Views
619
Drivetrain Parts Dec 26, 2025
AeroCoupe
Drivetrain Vibration after changing clutch
  • keel
  • Oct 18, 2024
  • Fox 5.0 Mustang Tech
Replies
14
Views
942
Fox 5.0 Mustang Tech Nov 8, 2024
Noobz347
A
SOLD For Sale: 1993 Ford Mustang Cobra Modified
  • anjteal93
  • Sep 5, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
13
Views
2K
Fox Body Mustangs For Sale (1979-93) Oct 26, 2025
Mindseye007
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
664
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
NEED SOME SPEC CLUTCH DIMENSIONS
  • PonyGTrider
  • Jun 2, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
368
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 2, 2024
PonyGTrider
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?