Im running a fairly new Ram Hdx clutch in my fox and was working fine for a long time but i had to jam the clutch to the floor to get it in gear so i adjusted it back about an inch or two and now it it slipping under any medium to hard acceleration...very frustraiting..all components on the clutch including flywheel and pressure plate have roughly 10,000 miles on it...did the clutch go bad or is it lack of proper adjustments??...If you have any suggestions let me know..thanks.
Clutch problem!!Help!! Slipping
- Thread starter TAS92gt
- Start date
ratio411
Founding Member
Sounds like an adjustment issue to me.
You need to regroup and readjust from some sort of baseline.
Don't let it keep slipping, or you will burn out the clutch and/or pressure plate.
You need to regroup and readjust from some sort of baseline.
Don't let it keep slipping, or you will burn out the clutch and/or pressure plate.
