Clutch

Moffa · Apr 9, 2005

I need to replace my oem clutch but I want to go aftermarket. I don't really know what companies are good to get clutches from or anything. Any suggestions?

FiveOoutlaw · Apr 9, 2005

I just had a Spec put in my 87 about 2 months ago and love it! It grabs nice and hard and is still driveable for the street. Car is mostly stock also.

87'GTstang · Apr 9, 2005

Ram has some very reliable replacement and heavier duty clutch kits at some good prices. The centerforce dual friction is a decent performance one but a little pricey. Also another one you'll hear stangers liking is the spec (stage 3 is it?).

One trend you will notice throughout a lot of clutch kits is the name Valeo - which is an OEM manufacturer and aftermarket supplier of clutch discs.

ram360 · Apr 9, 2005

I went with a king cobra in my car and I don't have any complaints grabs hard and the pedal pressure is light.

Daggar · Apr 9, 2005

Don't install a Spec III unless you're just tired of your tranny. They eat T-5s. hehe

whitehorseupnorth · Apr 9, 2005

Daggar said:
Don't install a Spec III unless you're just tired of your tranny. They eat T-5s. hehe

Oh man, I do't like the sound of that... I put one in last year. So far so good.

Daggar · Apr 9, 2005

whitehorseupnorth said:
Oh man, I do't like the sound of that... I put one in last year. So far so good.

Well like anything else, how you treat it goes a long way in determining how long it'll go before something gives. That Spec III is very grabby and has enough holding power to twist that T-5 into many crunchy chunks.

Car RamRod · Apr 9, 2005

where can i pick up a king cobra?

Grn92LX · Apr 9, 2005

www.ddperformance.com Is where you can get a king cobra, FMS HD or a mcleod dual friction. Those are the ONLY clutches i'd ever use.

HISSIN50 · Apr 10, 2005

Grn92LX said:
www.ddperformance.com Is where you can get a king cobra, FMS HD or a mcleod dual friction. Those are the ONLY clutches i'd ever use.

or sometimes you just mix them up and run a little bit of each.

Grn92LX · Apr 10, 2005

Yep. My mcleod dual friction disk is sitting here next to me and i'll be buying another king cobra pressure plate. I got a dude buying my old king cobra clutch and stock flywheel for $175 The king cobra pp did feel a little softer than the fms HD i had for 5 years.

kornchild4life · Apr 10, 2005

Grn92LX said:
www.ddperformance.com Is where you can get a king cobra, FMS HD or a mcleod dual friction. Those are the ONLY clutches i'd ever use.

how was your clutch pedel with the FMS HD one? im suppost to have that one in my car and its pretty stiff, nice little work out for my left leg

Grn92LX · Apr 10, 2005

kornchild4life said:
how was your clutch pedel with the FMS HD one? im suppost to have that one in my car and its pretty stiff, nice little work out for my left leg

It was fine, I ran it for 5 years and I must have been used to it. But i had it set pretty good with a firewall adjuster, fms quad and an adj cable. My Gf couldn't push it down all the way lol. The king cobra pressure plate made it a little softer but nothing too huge.

HISSIN50 · Apr 10, 2005

Mike, interesting about the HD vs KC comments. i have the HD unit as well. not too bad (till i drive something hydraulic, then the contrast gets me). i kinda wondered how much lighter a KC kit was. im leaning toward a KC for next time.

kornchild4life · Apr 10, 2005

thanks for the infor , i think i need to save up a couple of bucks and get a adj. cable and what not.

Moffa · Apr 10, 2005

yeah thanks for the input

HISSIN50 · Apr 10, 2005

kornchild4life said:
thanks for the infor , i think i need to save up a couple of bucks and get a adj. cable and what not.

actually, i would stick with the stock non-adjustable cable and get a FWA (and aftermarket quadrant if you dont have one). adjustable cables are not as well liked as stock cables.

good luck.

5spd GT · Apr 10, 2005

I have had a King Cobra clutch and loved it! I sat in a FMS HD clutched car and the pedal feel was quite a bit stiffer to push down...

I would prefer the King Cobra.

Centerforce makes some great clutches as well

tunedin302 · Apr 10, 2005

whitehorseupnorth said:
Oh man, I do't like the sound of that... I put one in last year. So far so good.

Do you have a stock tranny with over 500hp??

Grn92LX · Apr 10, 2005

HISSIN50 said:
Mike, interesting about the HD vs KC comments. i have the HD unit as well. not too bad (till i drive something hydraulic, then the contrast gets me). i kinda wondered how much lighter a KC kit was. im leaning toward a KC for next time.

If your HD clutch ever dies or you want to replace it I would do the king cobra over the HD next time. When I first pushed down the pedal with my king cobra clutch I noticed the difference immediatly. Its not like going from a HD to a hydrolic clutch but its definatly a little softer. I'm going to buy another king cobra pressure plate once this kid sends the money out for my old KC clutch kit and flywheel.

Anyone have a picture for proper clutch cable routing? Now that my motor is out of the car I kinda forgot exactly how it routes.

Clutch

New Member

New Member

New Member

New Member

SSoM President

New Member

Banned

Fidanza Man!

"How long does it take to get help in here?

Fidanza Man!

New Member

Fidanza Man!

"How long does it take to get help in here?

New Member

New Member

"How long does it take to get help in here?

"the 5.0 owns all"

I AM the law!!!

Fidanza Man!

Similar threads

Privacy & Transparency

Privacy & Transparency