Cobra brake caliper install, need help

BK_CAULEY

it's built for speed not longevity, woman

Dec 26, 2006

0

10

49

Thomasville, ga

Jul 19, 2008

#1

• Jul 19, 2008

• #1

i have recently aquired a set of cobra calipers. i do not know what year they came off of but i got them at a steal.

My question is how or what do i need to install them. i did a search but found nothing usefull. The only thing i found was the sn lines will not fit the calipers. and i might have a banjo bolt problem. right now i have 94 v6 spindles, rotors and calipers up front. and so far i dont see anyway they are going to mount up to what i have. any help on the would be appreciated.

and for reference i know where a 00 v6 with pbr calipers is so if applicable i can get parts off it.

http://i152.photobucket.com/albums/s176/bk_cauley/P1010529.jpg

 

BK_CAULEY

it's built for speed not longevity, woman

Dec 26, 2006

0

10

49

Thomasville, ga

Aug 7, 2008

#2

• Aug 7, 2008

• #2

so no one has ever ran cobra calipers on a fox before?

 

88GTMustang

New Member

Oct 31, 2003

247

0

0

LA california

Aug 7, 2008

#3

• Aug 7, 2008

• #3

you need the caliper brackets too from the cobra. and a banjo bolt i beleive its a m10 1.25 prolly only can get it from the dealership

 

theconductor

15 Year Member

Aug 9, 2007

337

96

74

Roseville, CA

Aug 8, 2008

#4

• Aug 8, 2008

• #4

if you want ford parts, here are the part numbers from my m-2300-k kit.
Spindles-- F4ZZ-3105(6)-A
Hoses (caliper to hard line) F4ZZ-2078-A(C). Mine came with proper banjo bolts
Weatherhead fitting (passenger side) WEATHERHEAD 7828

Don't know if this helps, and it is certainly not the most inexpensive way!

-kyle

 

Mr. Rustypwnz

Advanced Member

Jun 1, 2005

1,761

63

69

indianapolis/ valdosta ga

Aug 8, 2008

#5

• Aug 8, 2008

• #5

you need: sn95 spindles (you already have)

13" rotors

the brackets for the calipers

the brake hoses and the above mentioned banjo bolt, its the same bolt on a c4 vette btw..

 

BK_CAULEY

it's built for speed not longevity, woman

Dec 26, 2006

0

10

49

Thomasville, ga

Aug 8, 2008

#6

• Aug 8, 2008

• #6

i can only find the brackets on ebay and i cant find the bolt anywhere. ive done a google search and i have came up with 3 diff part numbers for the bolts. i need some positive #'s

 

S

seijirou

Founding Member

Aug 15, 2002

2,417

4

48

DFW

Aug 8, 2008

#7

• Aug 8, 2008

• #7

88GTMustang said:

you need the caliper brackets too from the cobra. and a banjo bolt i beleive its a m10 1.25 prolly only can get it from the dealership

Click to expand...

Cheap banjo bolts of various sizes.

EXTREME PSI : Your #1 Source for In Stock Performance Parts - Banjo Bolt

also with handy-dandy copper crush washers which are on the same page.

 

S

seijirou

Founding Member

Aug 15, 2002

2,417

4

48

DFW

Aug 8, 2008

#8

• Aug 8, 2008

• #8

BK_CAULEY said:

i can only find the brackets on ebay and i cant find the bolt anywhere. ive done a google search and i have came up with 3 diff part numbers for the bolts. i need some positive #'s

Click to expand...

Take your caliper to lowes/home depot/ace etc. Go to the nuts and bolts section. Find the bolt that screws in where the banjo bolt would go, and take note of it's size (10mm x 1.25 for example)

Then go to the link above, and purchase as many of that size banjo bolt and 2 copper washers for each bolt.

Drink some beers and wait for the mailman.

 

theconductor

15 Year Member

Aug 9, 2007

337

96

74

Roseville, CA

Aug 8, 2008

#9

• Aug 8, 2008

• #9

The part number for the hoses that I gave you come with the banjo bolts. Verify with the dealer when/if you order.....

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,216

17,899

224

Massachusetts

Aug 8, 2008

#10

• Aug 8, 2008

• #10

Chad's 2000 Mustang GT American Racer -- Bullitt Brake Upgrade

Mustangmotorsport - Mustangs and a whole lot more!