Cobra brakes (upgrade)
- Thread starter SexyStang1994
- Start date
YEAHLOH95
Founding Member
S/CBlack95GT
New Member
As posted in the other thread:
I was looking around a few days ago and found that some , if not all, MACH1's came with same calipers as the Cobras but without the logo. I will shearch for them again and post a link.
*edit*
Found the link(s)
front calipers:
http://www.stangsuspension.com/store...?idproduct=801
13" rotors:
http://www.stangsuspension.com/store...?idproduct=437
Here is the link for a kit that inlcudes both the calipers and rotors:
http://www.fordracingparts.com/parts...tKeyField=3440
It is cheaper to buy them seperately from stang suspension than to buy the kit from FFRP ($375 vs.$475). This kit does not include the master cylinder. From what I understand, the some people think that a stock GT master cylinder is just fine (you might want to search for that on your own).
I was looking around a few days ago and found that some , if not all, MACH1's came with same calipers as the Cobras but without the logo. I will shearch for them again and post a link.
*edit*
Found the link(s)
front calipers:
http://www.stangsuspension.com/store...?idproduct=801
13" rotors:
http://www.stangsuspension.com/store...?idproduct=437
Here is the link for a kit that inlcudes both the calipers and rotors:
http://www.fordracingparts.com/parts...tKeyField=3440
It is cheaper to buy them seperately from stang suspension than to buy the kit from FFRP ($375 vs.$475). This kit does not include the master cylinder. From what I understand, the some people think that a stock GT master cylinder is just fine (you might want to search for that on your own).
As above...The stangsuspension.com ones are just as good for less, and Josh there is a great person to deal with!
RC
RC
Car Nut
Founding Member
www.performancepartsinc.com
Performance Parts Inc. has the front kits and rear kits for just under $400 each. All hardware needed is included. I got both along with stainless steel lines for just over $800. All parts
PPI has the Bullitt, Mach1, and Cobra logos on the calipers. I got the red Cobra 10th Anniversary brakes for the Cobra name and good looking caliper.
Local mustang shop who did my install was real impressed by the quality and look. I'd recommend replacing front and rear brake stuff if you've still got stock stuff and high miles.
Performance Parts Inc. has the front kits and rear kits for just under $400 each. All hardware needed is included. I got both along with stainless steel lines for just over $800. All parts
PPI has the Bullitt, Mach1, and Cobra logos on the calipers. I got the red Cobra 10th Anniversary brakes for the Cobra name and good looking caliper.
Local mustang shop who did my install was real impressed by the quality and look. I'd recommend replacing front and rear brake stuff if you've still got stock stuff and high miles.
S/CBlack95GT
New Member
Similar threads
