Cold Air

[Shawneebear93]

Im thinking about running a setup like this one - Lower Air Scoop - with the lower scoop Edit: Part # 1410 . I don't plan to buy this one, I can make it with my dad and maybe make the scoop bigger.
Anyways, my question is - do you think this will have any benefit over a typical CAI in the engine bay or the fenderwell?
Thanks a lot guys!

 

[Ray III]

I have heard of going to hardware stores and looking in the HVAC section for heating ducts. There is a certain fitting that you fit a round hose to and it makes a 90 degree bend and opens into a rectangular opening for floor vents and such. They're popular for jimmy-rigged ram air scoops. If you get a 4 inch pipe on it it will probably not pose much restriction at low speeds but at speed the air being forced in should eliminate quite a lot of intake restriction.

 

[Shawneebear93]

I have heard of going to hardware stores and looking in the HVAC section for heating ducts. There is a certain fitting that you fit a round hose to and it makes a 90 degree bend and opens into a rectangular opening for floor vents and such. They're popular for jimmy-rigged ram air scoops. If you get a 4 inch pipe on it it will probably not pose much restriction at low speeds but at speed the air being forced in should eliminate quite a lot of intake restriction.

Thats pretty much the idea I had in mind