eliaseje Founding Member Jun 16, 2002 466 0 0 Ohio Aug 16, 2004 #1 Aug 16, 2004 #1 Right now I have my timing set at 32 degrees adv. I have heard that the ECU will only allow the timing to advanced to 24 degrees? Is this true?
Right now I have my timing set at 32 degrees adv. I have heard that the ECU will only allow the timing to advanced to 24 degrees? Is this true?
frink84 Member Apr 19, 2003 43 0 6 Forney, TX Aug 16, 2004 #2 Aug 16, 2004 #2 isnt even 24 degrees a bit high? arent stangs set at like 10 degrees factory? i thought like 15 degrees was a damned advanced timing....
isnt even 24 degrees a bit high? arent stangs set at like 10 degrees factory? i thought like 15 degrees was a damned advanced timing....
eliaseje Founding Member Jun 16, 2002 466 0 0 Ohio Aug 16, 2004 #3 Aug 16, 2004 #3 well i have trickflow twisted wedge heads and Trickflow stage 1 cam and the instructions on the heads say to run the TOTAL timing at 32 to 34 degrees timing. Is there a difference between regular timing and total timing?
well i have trickflow twisted wedge heads and Trickflow stage 1 cam and the instructions on the heads say to run the TOTAL timing at 32 to 34 degrees timing. Is there a difference between regular timing and total timing?
G gt90stang New Member Dec 7, 2002 568 0 0 Aug 16, 2004 #4 Aug 16, 2004 #4 Yes, the PCM adds timing based on load, altitude, rpm and throttle position. My A9P will get up to 50* BTDC under light load conditions. Good Luck, Don
Yes, the PCM adds timing based on load, altitude, rpm and throttle position. My A9P will get up to 50* BTDC under light load conditions. Good Luck, Don
