I'm fairly new to modifying an EFI engine. So, if I were to install a Trick Flow cam, would the computer need retuned for the bigger cam? For instance, the injectors would need to know that they would need to flow longer than usual because of the increased duration and flow more because of the increased lift. Correct? Or would the MAF meter automatically tell them how much more air is being pulled in and how much longer it's being pulled in and automatically compenstate?
BTW, would the TFS-51402001 cam be a good one for my combo in my sig? It has 224/232 duration @ .050in and .542/.563 valve lift.
Basically, the engine will eventually be a 331 or 347. Hence the 75mm TB and 30# injectors. I just basically want a good cam that I will be able to use in the stroker when it comes time, but have it help this engine eat up all the fuel it's recieving for the time being.
BTW, would the TFS-51402001 cam be a good one for my combo in my sig? It has 224/232 duration @ .050in and .542/.563 valve lift.
Basically, the engine will eventually be a 331 or 347. Hence the 75mm TB and 30# injectors. I just basically want a good cam that I will be able to use in the stroker when it comes time, but have it help this engine eat up all the fuel it's recieving for the time being.
