• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

condition of distributor cap

  • Thread starter Thread starter just4bob50
  • Start date Start date Aug 28, 2005

just4bob50

Active Member
Apr 2, 2005
504
5
28
Pa.
Aug 28, 2005
#1
  • Aug 28, 2005
  • #1
when i was working on my car yesterday I pulled my dist. cap for some clearance. On the terminals on the inside of the cap i saw a white residue where the rotor would pass. As i cleaned the terminals up i saw that the metal on the terminals was actually missing. there were obvious cresent shaped areas that looked as though the metal was burnt away. Last summer when i bought my crane HI-6S ign. system i replaced all the plug wires and cap & rotor. the cap and rotor were from autozone. after i put the cap back on, my car had a slight miss and the ign. sounded like it started to break up after 5000rpms. It did not do this before i cleaned the terminals.I was told that the crane throws too much spark for the cheap autozone cap & rotor to hold up to long term. If this is true I was going to order the MSD replacement cap and rotor. Also I have the original ign. module on my stock dist. and my car has over 100,000 miles on it. should that be replaced also and if so what part would work with my set up.
 

Bottomlesspit

I started the longest tech thread in the known uni
Founding Member
Jan 1, 1999
2,636
2
48
Del Rio, TX
Aug 29, 2005
#2
  • Aug 29, 2005
  • #2
Just4.
I can't answer all your questions but thought I would share my experience with this stuff.
I ran the MSD ignition on my car for a couple of years. I used a Ford Cap and rotor and FRPP 9mm ignition wires. Yes, my cap terminals had that little groove where the rotor went wizzing by. Also got that white corrosion stuff too. The white corrosion is normal for the aluminum posts, just needs to be cleaned occasionally. A little dielectric grease on all the metal parts helps. Brass terminals are supposedly a help with the corrosion. I tried an expensive brass cap, can't remember the company, but didn't really find any difference. Instead of white corrosion it was black!
At one point I did actually develop a miss situation...and especially a dropout of ignition at higher rpms. Ford diagnosed it as a faulty ignition module. I even got in on a class action law suit and got my money returned to me. The TFI modules are easy to replace, and with your combo and mileage it sure wouldn't hurt. I would definitely go with a Ford or PA performance TFI. Don't go with a parts store TFI. I made that mistake and it didn't work well at all.
Good luck and let us know what you find out.
Ken
 
You must log in or register to reply here.

Similar threads

Engine Hiccup at full throttle
  • keel
  • Jun 2, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
31
Views
1K
Fox 5.0 Mustang Tech Jul 30, 2026
keel
K
Resolved Weird sound coming from a freshly rebuilt 5.0L
  • karhoot
  • Jun 24, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
397
Fox 5.0 Mustang Tech Jun 27, 2026
Mac131
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
S
Engine 1990 5.0 bogs and pops over half throttle
  • Sander
  • Aug 1, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
469
Fox 5.0 Mustang Tech Aug 2, 2025
AeroCoupe
W
New plugs, wires, dist cap and rotor, now randomly stalling
  • WhiskeyFoxTrot
  • Oct 12, 2024
  • Fox 5.0 Mustang Tech
Replies
14
Views
682
Fox 5.0 Mustang Tech Oct 15, 2024
WhiskeyFoxTrot
W
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?