• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Cooling Fan Options

  • Thread starter Thread starter JD1964
  • Start date Start date Oct 8, 2017
  • 1
  • 2
Next
1 of 2 Next Last

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Oct 8, 2017
#1
  • Oct 8, 2017
  • #1
93 Lx. Still has factory engine fan. Man this thing is loud. It’s a 9 blade. I also have a 7 blade. Do you think the 7 blade would be quieter?

What about electrical fan options? I have a good local supply of junkyard parts. I’ve heard people using dual fan setup and controls from other ford cars. Which parts from which year and models will fit nicely in the 93 Lx?
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Oct 8, 2017
#2
  • Oct 8, 2017
  • #2
john, it's hard to beat the stock clucch fan. unless it is not cooling I would leave it be.
if you want a E fan,I would go with the contour dual fan and a FAL 33054 controller
The fan fits the radiator perfect and pulls well over 3300 cfm
 
Reactions: imp and revhead347

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Oct 8, 2017
#3
  • Oct 8, 2017
  • #3
Any idea on the year range for the Contour fan?
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Oct 8, 2017
#4
  • Oct 8, 2017
  • #4
99-02 or a Cougar fan. samething. Dorman sells them
 

Steel1

Mustang Master
Aug 18, 2017
1,419
639
143
Connecticut
Oct 8, 2017
#5
  • Oct 8, 2017
  • #5
I've been running Intrepid dual fans for years now with Flexalite VSC33054 controller.
Had to do a little trimming but they fit the radiator really well, believe the fan was for a
2002 Intrepid.
A lot of people run the Contour fans with great success, with any electric fan
make sure your wiring and alt. are up to the task.
 

Ryuk

I love your drawers
5 Year Member
Apr 22, 2017
1,718
1,656
133
Oct 9, 2017
#6
  • Oct 9, 2017
  • #6
Seems like a good time to drag this one back out.

View: https://www.youtube.com/watch?v=ZXdLgaFXZzs
 
Reactions: General karthief

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Oct 9, 2017
#7
  • Oct 9, 2017
  • #7
I pulled the 9 blade fan and put the 7 blade one on. It’s larger in diameter and hit the shroud. I trimmed the ends of the plastic blades about 1/2”. It’s quieter than the 9 blade. But still a tad noisy
 

killer5.0

5 Year Member
Oct 8, 2009
725
83
59
Oct 9, 2017
#8
  • Oct 9, 2017
  • #8
I tracked down a NOS oem dual contour...i use a dakota digital controller...works great and alot more room in the front of the motor
 

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,501
8,763
234
S.I.NY
Oct 10, 2017
#9
  • Oct 10, 2017
  • #9
Contour .
 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Oct 10, 2017
#10
  • Oct 10, 2017
  • #10
TOOLOW91 said:
Contour .
Click to expand...


Nice!
 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Oct 10, 2017
#11
  • Oct 10, 2017
  • #11
I've been fixing this car up mainly as a turn key reliable driver for my wife. Heck, now I'm enjoying it nicely too. I've never had a convertible before. It's not totally done yet but I took her for a drive in it last night. At one point she said, "get on it"! So I did. After I let off she said, "whats that noise"? I laughed and told her it was the engine fan.

While I'm contemplating an electric fan setup, there's one thing that's making me balk at that idea. It's auto trans and I'm running an aux cooler only, the lines are not plumbed through the radiator. The aux cooler is mounted directly in front of the radiator right in the middle of it. Aux cooler measures 12"x8" by 3/4" thick. It's adequate on it's own I'm sure, with an engine fan constantly moving air through it. Especially when sitting in traffic a good engine fan will still be pulling decent air amount of air at idle. The only thing I don't like about the stock engine clutch fan is the roaring noise it makes.

Gonna give this a try. It's certainly lighter than the stock fan and clutch combined. We'll see if the noise factor is different. These blades flatten out at higher rpms and maybe will be quieter in those instances. At idle they keep a steep pitch and move good air. >>> http://www.jegs.com/i/Flex-a-lite/400/1517/10002/-1
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,129
10,748
213
polk county florida
Oct 10, 2017
#12
  • Oct 10, 2017
  • #12
No to the flex fan, a good clutch fan or an electric one.
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,953
5,831
213
Oct 10, 2017
#13
  • Oct 10, 2017
  • #13
+1 for contour fans. I pulled mine out of a Cougar. I'll be running them to two separate OEM fan switches to control high and low fan. You can add a thrird relay to trigger AC high fan.

I had a flex fan in a previous mustang. That thing was loud.....sounded like a supercharger. I really had a guy follow my to a car wash and swore I had a supercharger....until I opened the hood.
 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Oct 10, 2017
#14
  • Oct 10, 2017
  • #14
Yeah I might wind up plumbing the trans cooler lines through the radiator and the aux cooler and running the Contour fans. I wonder what my current alternator is. Gonna go take some pics of it now.
 

Ryuk

I love your drawers
5 Year Member
Apr 22, 2017
1,718
1,656
133
Oct 10, 2017
#15
  • Oct 10, 2017
  • #15
John Dirks Jr said:
Gonna give this a try. It's certainly lighter than the stock fan and clutch combined. We'll see if the noise factor is different. These blades flatten out at higher rpms and maybe will be quieter in those instances. At idle they keep a steep pitch and move good air. >>> http://www.jegs.com/i/Flex-a-lite/400/1517/10002/-1
Click to expand...

Watch the video I posted. You'll change your mind.
 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Oct 10, 2017
#16
  • Oct 10, 2017
  • #16
It's got a standard 75 amp re-manufactured on there. Would this fall short of demand for a Contour fan setup? All pulleys are stock.
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,129
10,748
213
polk county florida
Oct 10, 2017
#17
  • Oct 10, 2017
  • #17
Yes, it's marginal for even a stock setup.
 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Oct 10, 2017
#18
  • Oct 10, 2017
  • #18
JD08 said:
Watch the video I posted. You'll change your mind.
Click to expand...
Point on HP loss taken. However, minimizing HP, loss is not my basic goal on this particular car.
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,953
5,831
213
Oct 10, 2017
#19
  • Oct 10, 2017
  • #19
That alternator is way too weak. 3g alternator is a must. The stock alternators also had an issue with burning up when they went bad.
 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Oct 10, 2017
#20
  • Oct 10, 2017
  • #20
90sickfox said:
That alternator is way too weak. 3g alternator is a must. The stock alternators also had an issue with burning up when they went bad.
Click to expand...

3g a must for what? Electric fan setup ? A 75 amp stock alt is ok with a engine fan right? Still
got stock pulleys so there’s no underdrive.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
Engine Which cooling part first?
  • Dontknowchit
  • May 8, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
2K
Fox 5.0 Mustang Tech May 15, 2025
90trunk
B
Take a look at my rack!
  • bicknell
  • Sep 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
860
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 13, 2025
Willybill32
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
485
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
J
For Sale MASTER LISTING: Abandoned '66 Mustang Restomod Part-Out (Wilwood, Ididit, Quick Performance, Mishimoto)
  • JasonB66
  • Jul 23, 2026
  • Suspension
Replies
0
Views
320
Suspension Jul 23, 2026
JasonB66
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?