• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Cooling problem on a s/c 93' Cobra

  • Thread starter Thread starter JParm93
  • Start date Start date Sep 24, 2005
J

JParm93

New Member
Jan 1, 2002
9
0
0
Central Illinois
Sep 24, 2005
#1
  • Sep 24, 2005
  • #1
Ever since I had to replace the lower intake gasket I have an air pocket that I can't get out. The car is supercharged and I want to make sure that it is an air pocket rather than a head gasket. I don't want to go through the time of a head gasket replacement and have the same problem when I am done. There is no oil in the antifreeze, no antifreeze in the oil and no smoke from the exhaust which leads me to thinking that it is an air pocket. The temp will spike then come down a bit and then spike again after a few miles. It doesn't seem to be affected when under boost. I recently had to run it without the blower belt and temp does the same thing when I run it through the gears without the blower. Eventually it will push water out the overflow and when it cools the radiator will be half empty. Any help or suggestions will be greatly appreciated.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Sep 24, 2005
#2
  • Sep 24, 2005
  • #2
Did the radiator get lowered at any time?

The overflow needs to be the high point in the system. This is more common of a problem on taller 351w conversions, but that is all I can think of now, assuming no failed parts.

Check that the rubber mounting tabs are on the bottom of the radiator.

good luck
jason
 
You must log in or register to reply here.

Similar threads

B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
183
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
J
'04 3.8L V6 mineral deposits and oil on #3 cylinder. Does it need a rebuild or something simpler?
  • joeybuddy96
  • Mar 18, 2026
  • SN95 V6 Mustang Tech
Replies
5
Views
224
SN95 V6 Mustang Tech Jun 9, 2026
joeybuddy96
J
X
Engine 5.0 Head Gaskets installed wrong block coolant passages???
  • Xam Sirrah
  • Jul 21, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
641
Fox 5.0 Mustang Tech Dec 22, 2025
Qtrhrse23
Q
O
Sooty/Oily Front Engine & Pulleys
  • ozenator
  • Jun 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
239
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 22, 2026
Blackhawkxx
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
679
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?