COP and boot assembly

Green&GoldGT

Member

Aug 1, 2005

302

0

17

Virginia

Feb 22, 2008

#1

• Feb 22, 2008

• #1

Hey I just bought a new set of coil boots for my COP and I'm trying to figure out how to connect them together. The boots have the metal coils already installed. I just need to know how to get the metal coil connected to the COP. The instructions show them tapping the metal coil alone to the COP. Has anyone done this before or have any suggestions?

 

B

bdcardinal

tree hugger

Jun 10, 2003

3,612

16

69

santa barbara, CA

Feb 22, 2008

#2

• Feb 22, 2008

• #2

did you get OEM? cause on the OEM ones you jsut pull and the old one comes off and you push the new one on. the springs are part fo hte coil iirc.

 

BurningRubber

10 Year Member

Dec 6, 2004

1,865

24

58

Feb 22, 2008

#3

• Feb 22, 2008

• #3

They come apart seperate.

When I replaced my boots and coils, I fed the spring through the new boot (be careful), and when it came out of the top it kind of hooks/snaps into the top of the COP.

 

Green&GoldGT

Member

Aug 1, 2005

302

0

17

Virginia

Feb 22, 2008

#4

• Feb 22, 2008

• #4

I pulled the boot off my old COP and the metal coil was connected to the COP. Now the new coils are in the boot and the coil isn't long enough to reach the COP, and it doesn't even seem that it would reach the spark plug, it's so compacted in the boot. Any other suggestions?

 

B

bdcardinal

tree hugger

Jun 10, 2003

3,612

16

69

santa barbara, CA

Feb 22, 2008

#5

• Feb 22, 2008

• #5

what brand are they, if they are ford whats the part number?

 

Green&GoldGT

Member

Aug 1, 2005

302

0

17

Virginia

Feb 22, 2008

#6

• Feb 22, 2008

• #6

They are ford. Got them from 5.0 resto, aka Late Model Restoration

 

B

blubullett

Member

Jun 22, 2006

535

6

18

Modesto, CA

Feb 23, 2008

#7

• Feb 23, 2008

• #7

They are long enough. Pull the rubber boot off, pull the old spring off. Put the new spring on, put the new boot on. They are hard to snap on sometimes but when you tighten the screw that holds the coil on they will snap on.