Cup Holder

95's come with a crappy single can holder just in front of the console lid-totally useless. I just got a junk yard console from a Pull A Part from a 98 Mustang, and they come with 2 slots mounted just behind the shifter-much better! And, I just was getting some parts from a 2002, and it even has a provision for a big gulp. I know this info isn't helpful for you guys with the pre 94 cars, but for my era this is a nice, cheap, and factory improvement.
 
Test.webp
Glass.webp
Cups.webp

I dug up a few old pics, you can see a trial fit in the 1st pic, the backside in the 2nd pic, and primed and ready for paint in the 3rd pic. I struggled on deciding what to do about the grain pattern, ended up wet sanding all the grain out of it but I did purchase some texture coating to reproduce the grain back in but I haven't felt like pulling it back out to mess with it. I also used a 1998 Cobra Handbrake Handle because I wanted to have a Leather Handle and also added a Leather Boot.
 
Redlinegoods.com makes leather boots for these cars as well. I have their shifterboot and it's very nice, so been debating getting the e brake boot.

eBay has junk for top console lids. I don't get how people can ask $50+ for one that is all cracked and chipped and discolored?

Repros are $100 and someone actually has an NOS top cover for $100...but seems like acwaster to cut that up.

There's an NOS white one on eBay for $200. That would be a great resto piece for someone with white interior


Edit: ok I found a good console cover. Now what's a good donor for cup holders?
 
did purchase some texture coating to reproduce the grain back in but I haven't felt like pulling it back out to mess with it. I also used a 1998 Cobra Handbrake Handle because I wanted to have a Leather Handle and also added a Leather Boot.


What texture coating did you buy?

Also just snagged a 1998 Cobra handle. Figure if I'm tearing into the console, might as well do this once
 
What texture coating did you buy?

Also just snagged a 1998 Cobra handle. Figure if I'm tearing into the console, might as well do this once
I used Redline for the Leather Boot, and the Coating is SEM 39853. I wish I knew what vehicle my cup holders came from but it was a broken panel with no markings, however I recall running into a guy several years ago that told me he was building the same thing and got them out of a Chevy Colorado, no idea how it looked though.
 
In case anyone was curious, I cut the holder to fit the panel the best I could then used a small amount of Gorilla Glue just to hold it in place, then once I was happy with the placement I mixed up Fiberglass and used strips of fiberglass mat to secure everything, once sanded down I used a very small amount of body filler to fill some minor imperfections, it's 6 or 7 years old now and everything is just fine with it.
 
Here in Washington, they just passed a law that makes smoking, either with a real or vape type cigarette, eating or drinking, even water, while driving a ticket-able offence. Not to mention grooming of any kind let alone texting or talking on a phone, outside of a hands free device. Basically, they want you to drive and do nothing else. You can get pulled over for the phone stuff, but the other stuff is a secondary offence, in other words, if you pulled over for one thing and they see a cup of coffee, soda or a lit cigarette, a half eaten burger or fries, they can write you up for distracted driving. Enjoy your cup holders while you can, the nanny state is coming after you!
 
  • Like
Reactions: General karthief
How aggressively they chose to enforce the new law will be interesting. I do not see any let up in the number of people smoking/vaping while driving yet, let alone the burger munchers.