Current project log on the Stereo Integrity Cobra

KWIK9550 · Jun 1, 2005

Let's start with the Omnifi. I think many have seen it, but here goes.

I started with this.

And finished with this.

Perfect routing of the cable. This necessitated desoldering the wires inside the circuit board, but it was only 5 simple wires and they were spaced far enough apart for my iron to get them.

Some finished pics.
Now you see it.

Now you don't.

Passenger side for comparison.

More.

KWIK9550 · Jun 1, 2005

Here you can see the RCAs nicely routed away from any power wire.

Can you see them?

Beginnings of the sub enclosure/amprack.
All the Spectrum is dried.

Everything taped up and the frame is halfway done.

My slick custom mount for the fuse holder.

Turned out very well and allows for access to the battery hold down mounting bolt incase of an emergency.

Fuse holder installed.

KWIK9550 · Jun 1, 2005

And the glassing began tonight. I am having a love/hate relationship with FG. I'm sure you all can relate. The sanding will be even more intensive. Damn. I am beginning to think I should give up on car audio. Anyways was feeling good after sniffing resin for hours.

There's four layers of mat there. Will follow with a couple more, pull it out, fill in any gaps, then finish off with cloth and a special interior concoction of my own. No resonances for me.

Here's some random ones.

Hmm, where might these go?

Wanna play?

KWIK9550 · Jun 1, 2005

Some miscellaneous stuff.

Infinity · Jun 2, 2005

If you're Nick, then hurry up on the new D2's. I'll run a single Magnum D2 15 in my '06 if they are available when I get the car.

Infinity · Jun 2, 2005

BTW, sorry I forgot to mention a second ago- THAT RIDE IS SWEET!!!!!

strokedandblown · Jun 2, 2005

Really nice job, very impressed.
Im a big fan of the total package look.

KWIK9550 · Jun 2, 2005

Infinity02Zinc said:
If you're Nick, then hurry up on the new D2's. I'll run a single Magnum D2 15 in my '06 if they are available when I get the car.

I'm not Nick, but I am a rep. If you frequent any of the audio boards, you may notice me as Tirefryr. That's my name everywhere else.

As for the drivers, they are not ready yet, but they are being built. We are running a sort of pre-order sale next week for 2 weeks only. The new drivers are simply amazing. My custom Claw goes in next week for all it's new stuff. I can't wait.

Thanks for the compliments too! New wheels and tires are on the way.

MyEarsHurt · Jun 2, 2005

Nice install so far...too bad the car is gonna smell like fiberglass for months! I hate that smell and my car was full of it when I did my fiberglass enclosure in the trunk, so I am sure that has to smell even worse.

Black2001GT · Jun 3, 2005

Unreal install. Very detailed pics and explanations.

zincyellow03 · Jun 3, 2005

One word: WOW

Great job

Infinity · Jun 3, 2005

KWIK9550 said:
I'm not Nick, but I am a rep. If you frequent any of the audio boards, you may notice me as Tirefryr. That's my name everywhere else.

As for the drivers, they are not ready yet, but they are being built. We are running a sort of pre-order sale next week for 2 weeks only. The new drivers are simply amazing. My custom Claw goes in next week for all it's new stuff. I can't wait.

Thanks for the compliments too! New wheels and tires are on the way.

Yep. SoundIllusion junky I've PM'd you in the past. I'm Infinity on most boards, and I live just down south of you. I'm looking forward to the new drivers, and I feel it's a shame that the components were tossed aside. If they came out anywhere near the quality of the subs, they would be SWEET!

MisterCMK · Jun 3, 2005

damn, that really looks nice

Philstang · Jun 27, 2005

any updates here ???

KWIK9550 · Jul 4, 2005

MyEarsHurt said:
Nice install so far...too bad the car is gonna smell like fiberglass for months! I hate that smell and my car was full of it when I did my fiberglass enclosure in the trunk, so I am sure that has to smell even worse.

Nah, the intial layer was cured in an hour. Pulled it out after that. No residual smell what-so-ever. Done this many times so now I know how to control it.

Infinity02Zinc said:
Yep. SoundIllusion junky I've PM'd you in the past. I'm Infinity on most boards, and I live just down south of you. I'm looking forward to the new drivers, and I feel it's a shame that the components were tossed aside. If they came out anywhere near the quality of the subs, they would be SWEET!

After the theft, Nick decided it just wasn't a good venture. I'm sure he will start expansion once the dealer network gets established. It's been hell just tryin to get new drivers out. The original plans would have had the drivers out last October/November, but a certain company who moved most buildhouse practices to Chile (figure that one out ), kept dropping the ball. Nick finally got fed up and went with another buildhouse. You can pretty much tell who that is by the finish on the motors. Then all the custom tooling and new one-off pieces took quite a while to design. All-in-all it's a much improved driver compared to the previous model. Nick said he finally has the driver doing EXACTLY what he intended it to do.

Philstang said:
any updates here ???

Progress has been slow. I keep changing my mind here. This was originall supposed to be a simple stealth/budget install. I think I've pretty much thrown that out the window. It won't be too extravagant, but there will be a little hint of showiness.

KWIK9550 · Jul 4, 2005

Here's some random stuff for your eyes.

Pictures of my roughed-out baffle and wired up with LEDs.

Crazy hands!

KWIK9550 · Jul 4, 2005

My new LCY 130 ribbons.

In-car testing.

iskwezm · Jul 4, 2005

I like the work on the box.One question,all the time you spent on it,why didnt you just re wrap the visor so there isnt a gap at the bottom?

KWIK9550 · Jul 4, 2005

iskwezm said:
I like the work on the box.One question,all the time you spent on it,why didnt you just re wrap the visor so there isnt a gap at the bottom?

Gap? Are you talking about below the faceplate of the controller? If so, I did that simply so I can reinstall the mirror and return it to factory if the need ever arises.

nhra427 · Jul 5, 2005

I want to see pics of those ribbons installed. I have been thinking of going to those. A review of the ribbons would be nice

Current project log on the Stereo Integrity Cobra

KWIK9550

KWIK9550

KWIK9550

KWIK9550

Infinity

Infinity

strokedandblown

Banned

KWIK9550

MyEarsHurt

New Member

Black2001GT

zincyellow03

New Member

Infinity

MisterCMK

Philstang

New Member

KWIK9550

KWIK9550

KWIK9550

iskwezm

KWIK9550

nhra427

New Member

Similar threads

Current project log on the Stereo Integrity Cobra

Banned

New Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency