I wont bore you guys with a long story, so im keeping it the shortest I can.
In 1995 my dad bought me a 1969 Mustang Grande. My plan was to paint it with some money I had back then but the engine broke a couple of month of driving it. A friend of my brother fixed the 302 V8 engine.
What I remember from back then:
What I recently added:
What Competition Cam (or other) you guys recommend?????
You can see the motor in idle here:
In 1995 my dad bought me a 1969 Mustang Grande. My plan was to paint it with some money I had back then but the engine broke a couple of month of driving it. A friend of my brother fixed the 302 V8 engine.
What I remember from back then:
- 302 Block was bore .40
- He put a 1969 or 1970 Mach1 351w Cylinder heads
- Edelbrock Torker II Intake
- Holley 650 double pumper
- Forged pistons (I think 9.5 compression)
- He ported the exhaust of the heads and made bigger some oil holes in the engine block.
- Comp Cams Roller rockers 1.6
- Duration 280, Lift 512 Magnum Competition Cam (almost sure this is correct)
- Hydraulic Flat Tappet Lifters
What I recently added:
- Shorty Headers
- Aluminum Radiator with electric fan
- C4 Saturday Night Special Converter (which is too low for the cam)
- Flowmaster American Thunder 2.5" dual exhaust
- Steeroids Rack
- 13" Baer Brakes on all 4 corners
- 9" Rear posi 4.11 (not sure about the ratio)
- Fiberglass Hood
- Classic Auto Air A/C Kit
- Wheels 17 x 8 Front, 17 x 9.5 Back
What Competition Cam (or other) you guys recommend?????
You can see the motor in idle here: