custom cams for a 347

aleborjas · Jun 19, 2007

hi, wich company or who makes the better custom cams? i have 347 with AFR 185's, 10.5:1, performer RPM intake, 30 pound injectors, 70mm TB, 1 3/4 LT's headers, 3.90 gears, T5, i whant to spin arround 6500 RPM's and leave my A/C and all powers working what is the best cam can i use making power and leaving all my acc's

jtfairlane · Jun 19, 2007

We can't tell you what cam will work best, because than that would be recommending an existing grind or off-the-shelf cam.

If you want a custom cam, one whose specs are created specifically for your vehicle, the most popular people are Jay at Camshaft Innovations and Ed Curtis at Flow Tech Induction. You can also specify to Comp Cams what numbers you want in a cam, and they will grind a custom one for you as well. Quality is top notch no matter which of the three you go with, in materials anyway, the proof though is in the quality of the recommended specs.

Rick 91GT · Jun 19, 2007

jtfairlane said:
We can't tell you what cam will work best, because than that would be recommending an existing grind or off-the-shelf cam.

If you want a custom cam, one whose specs are created specifically for your vehicle, the most popular people are Jay at Camshaft Innovations and Ed Curtis at Flow Tech Induction. You can also specify to Comp Cams what numbers you want in a cam, and they will grind a custom one for you as well. Quality is top notch no matter which of the three you go with, in materials anyway, the proof though is in the quality of the recommended specs.

I use Ed www.flowtechinduction.com and Jay www.camshaftinnovations.com for all of my custom cam needs as well...

vristang · Jun 19, 2007

I went to Jay Allen for my cam... (check my sig for a link to Camshaft Innovations)

It should be shipping today or tomorrow, and words cannot describe how excited I am to get this cam...

jason

1991vert · Jun 19, 2007

i went with jay...

aleborjas · Jun 19, 2007

i talked yerterday with CAM MOTION they make only custom cams too what do yo u think? because the ones you mentioned are a little expensive

vristang · Jun 19, 2007

aleborjas said:
i talked yerterday with CAM MOTION they make only custom cams too what do yo u think? because the ones you mentioned are a little expensive

You do get what you pay for....

1991vert · Jun 19, 2007

vristang said:
You do get what you pay for....

x2

Rick 91GT · Jun 19, 2007

Cam Motion has been arounf for a long time, they do good work as well. I've had customers send in their stuff from time to time.

When going with Ed or Jay you get the years of expierence they have in the industry, exact combo's, intentions etc... Neithe Ed or Jay grind there own cams, they do all the work to fit and form the profile and grind and have it ground o there exact specs, check them then ship them out.

cobradvm · Jun 19, 2007

The bitterness of a cheap product lingers longer than the sweet taste of a cheap price.

(I went with Jay Allen @ camshaftinnovations.com)

jtfairlane · Jun 19, 2007

aleborjas said:
i talked yerterday with CAM MOTION they make only custom cams too what do yo u think? because the ones you mentioned are a little expensive

You want to go custom and get something great, then spend the extra 50 bucks or 100 bucks or whatever it is.

You have to pay to play.

custom cams for a 347

aleborjas

New Member

jtfairlane

New Member

Rick 91GT

Mustang Master

vristang

1991vert

aleborjas

New Member

vristang

1991vert

Rick 91GT

Mustang Master

cobradvm

New Member

jtfairlane

New Member

Similar threads

custom cams for a 347

New Member

New Member

Mustang Master

New Member

Mustang Master

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency