Custom gauge install on 2000 GT - where CD player goes

2000BLKGT · Feb 25, 2006

Hey Folks,

Need some insight here.

I'm doing a custom stereo in my 2000 GT and I'll be tossing both the stock deck as well as the CD player. So I'm planning to mount a custom gauge cluster where the CD player goes...a bit more trick than simply installing a cubby-hole.

Has anyone here done this?

The initial thought is to take one of those cubby-holes that snaps in like the deck would...and fabricate the piece with a faceplate, and likely cut the back off of it to accommodate the wiring. I'm going with two Autometer lunar gauges (to match the rest of the gauges)...just Oil pressure and Voltmeter.

If anyone could offer any insight or ideas...it would be much appreciated.

Cheers

sgarlic · Feb 25, 2006

Some guy on eBay sells a kit like that for our cars, except I think it sort of just relocates the CD player.

I think if you delete everything in there, you're going to have a ton of leftover blank space.. so maybe along with the gauges you could put something else to fill space.. LED indicators or something maybe?

elite130 · Feb 25, 2006

Here's what I did on my old '98, and I know '99 and '00's are the same...I had 3 2-1/16 Autometer Phantom gauges(mechanical water temp, mechanical vacuum, and volt meter). I used a mudflap for the gauge holder. I know now someone makes a gauge holder for this area, I'm just notsure who. Let me know if you want more pics.

Oh yeah, you can tap into the dash lighting and dim the gauges the same as the rest of the dash. I don't really have anymore hints, but if I think of something, I'll let you know. Also, I had a volt meter, it is really pointless. All it does is show 12v w/ ignition on and 14v with car running. If I were you, do electric water temp and oil pressure gauge.

Barrier · Feb 25, 2006

I was wanting to do the same thing except use the space for toggle switches for my fan and a line lock... plus some other things possibly down the road. Any ideas where I might find one? I've seen gauge/toggle combos for older 5.0s but not for this particular application.

sgarlic · Feb 25, 2006

Not trying to be a negative nancy, but wouldn't you want your line lock switch to be somewhere a little more within your reach?

2000BLKGT · Feb 25, 2006

elite130 said:
Here's what I did on my old '98, and I know '99 and '00's are the same...I had 3 2-1/16 Autometer Phantom gauges(mechanical water temp, mechanical vacuum, and volt meter). I used a mudflap for the gauge holder. I know now someone makes a gauge holder for this area, I'm just notsure who. Let me know if you want more pics.

Oh yeah, you can tap into the dash lighting and dim the gauges the same as the rest of the dash. I don't really have anymore hints, but if I think of something, I'll let you know. Also, I had a volt meter, it is really pointless. All it does is show 12v w/ ignition on and 14v with car running. If I were you, do electric water temp and oil pressure gauge.

bingo...this is what I was looking for.

how exactly did you mount the faceplate with the gauges into the cluster?

you can send me a PM if you want.

appreciate the help

Spreadman · Feb 25, 2006

http://www.justagt2.com/gaugepods/

That's what I done.

Barrier · Feb 25, 2006

Noo! No PM I must know this...

How didst thou do this...

Spreadman · Feb 25, 2006

I bought the gauges. Then I called up Florida 5.0 (http://www.florida50.com) talked to Andy....and bought the dash pod and DIN replacement panel. Then I shipped everything off to Modular Powerhouse and they installed them when I did my blower and motor.

mity2 · Feb 26, 2006

I would do same if I could. 2001+ dash suckazz...

2000BLKGT · Feb 26, 2006

Spreadman said:
I bought the gauges. Then I called up Florida 5.0 (http://www.florida50.com) talked to Andy....and bought the dash pod and DIN replacement panel. Then I shipped everything off to Modular Powerhouse and they installed them when I did my blower and motor.

the "DIN replacement panel"...is that like a cubby hole that snaps in like the deck does?

looks awesome Spreadman

2000BLKGT · Feb 27, 2006

Spreadman said:
I bought the gauges. Then I called up Florida 5.0 (http://www.florida50.com) talked to Andy....and bought the dash pod and DIN replacement panel. Then I shipped everything off to Modular Powerhouse and they installed them when I did my blower and motor.

thanks for the link Spreadman

they're making me one that'll hold two gauges centered in the panel...should be up here within a week

image · Feb 27, 2006

hey bro thats sound like a pretty cool project. If it were me i'd see if scosche or a dash kit company makes a double din for our cars.. or hell i'd just get the mustang single din kit with the cubby hole for the other din... and then i'd either see if i can buy some mounts.. or make some mounts out of fiberglass. letme know how it goes.

2000BLKGT said:
Hey Folks,

Need some insight here.

I'm doing a custom stereo in my 2000 GT and I'll be tossing both the stock deck as well as the CD player. So I'm planning to mount a custom gauge cluster where the CD player goes...a bit more trick than simply installing a cubby-hole.

Has anyone here done this?

The initial thought is to take one of those cubby-holes that snaps in like the deck would...and fabricate the piece with a faceplate, and likely cut the back off of it to accommodate the wiring. I'm going with two Autometer lunar gauges (to match the rest of the gauges)...just Oil pressure and Voltmeter.

If anyone could offer any insight or ideas...it would be much appreciated.

Cheers

Custom gauge install on 2000 GT - where CD player goes

2000BLKGT

sgarlic

elite130

Member

Attachments

Barrier

New Member

sgarlic

2000BLKGT

Spreadman

two wheels

Barrier

New Member

Spreadman

two wheels

mity2

I like Pro3 and all I got was this crappy CT.

2000BLKGT

2000BLKGT

image

New Member

Similar threads

Custom gauge install on 2000 GT - where CD player goes

Member

Attachments

New Member

two wheels

New Member

two wheels

I like Pro3 and all I got was this crappy CT.

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency