• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Day At The Track

  • Thread starter Thread starter dustang50
  • Start date Start date Apr 15, 2006

dustang50

Member
Jan 12, 2006
132
0
16
Cleveland, OH
Apr 15, 2006
#1
  • Apr 15, 2006
  • #1
Had my first ever day at the drag strip today... The car was running well, but I couldn't get any traction AT ALL through 1st & 2nd gear. My best 60 ft time was 2.138. Talking to some guys there, they said that it wasn't bad for street tires, though.

Best time was a 14.194 @ 97.78.
Best speed was 99.569 (14.356).

Aside from DRs or slicks, does anyone have any tips?

Got by a Z06 on my first 2 runs. On the brighter side, I took out a WRX STi on my last run...
 

gtstangau

Member
Jan 9, 2006
133
0
16
Alabama
Apr 15, 2006
#2
  • Apr 15, 2006
  • #2
good luck hooking up with 4:10's and street tires!
 

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Apr 15, 2006
#3
  • Apr 15, 2006
  • #3
gtstangau said:
good luck hooking up with 4:10's and street tires!
Click to expand...
best 60' I ever pulled was a 2.05 w/ 4.10s and Sumitomo all-seasons. It does take some practice and work, but by no means am I experienced at the drag strip, Ive probably made 20-25 runs in my entire life. With some BFG KDWs or pretty much any street tire better than all-season Sumis, that 2.05 couldve* been a 1.9x. Guess I'll never know though bc Im just going with Mickey Thompsons anyway

Keep practicing man, the 60's will drop and ET will follow.
 

BlackenedSVT

Active Member
Jan 18, 2004
1,841
7
38
New Jersey
Apr 15, 2006
#4
  • Apr 15, 2006
  • #4
Hey thats some good times for your 1st time out. I'm hoping to dip into the 13s at least when i make a pass out to the track in a few weeks. Just waiting on saving up some cash to get these gears installed
 

dustang50

Member
Jan 12, 2006
132
0
16
Cleveland, OH
Apr 15, 2006
#5
  • Apr 15, 2006
  • #5
Those numbers seem low for the work I've put into the car, though. I thought I'd have no problem breaking into the 13s.

Test & tune day #2 is next Saturday. Hopefully I'll have better luck then.
 

BlackenedSVT

Active Member
Jan 18, 2004
1,841
7
38
New Jersey
Apr 15, 2006
#6
  • Apr 15, 2006
  • #6
Our cars stock are supposed to be doin 14.0-14.1 (professionally driven) flat. So there is room for improvement. I think that you can be pullin a 13.7, 13.8 with some good driving.
 

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Apr 15, 2006
#7
  • Apr 15, 2006
  • #7
Can you post FULL slips? I mean 60', 330', 1/8th, 1000' and 1/4 (whatever they gave you out of these) so I can look at some of my slips and compare? Then I can disect your times a little more and see what other advice I could help you with, if any. We have pretty similar mods. And post MPH as well as ET
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
Apr 15, 2006
#8
  • Apr 15, 2006
  • #8
The guy that owned my car before I bought it said he ran a 9 flat in the 1/8th mile with horrible traction. He said with traction he would have hit high 8's. Only thing the car has is a K&N intake and straight pipes after the stock H. Either he is one hell of a driver, or the car is making good power. I really need to learn how to drive it to its full potential. Its been lowered, so I know thats not helping launches... it really doesnt have any traction in first gear when ya romp it, 2nd isnt so bad because Im honestly not that great of a driver with the car yet.

But either way, thats a high 13 or low 14 with basically no mods. You should be well into the 13's with everything you have and traction.
 

dustang50

Member
Jan 12, 2006
132
0
16
Cleveland, OH
Apr 15, 2006
#9
  • Apr 15, 2006
  • #9
Here's the timeslip - I'm on the right (#71)...

BTW - what does M.O.V. stand for?
 

Attachments

  • timeslip1.webp
    19.8 KB · Views: 159

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Apr 15, 2006
#10
  • Apr 15, 2006
  • #10
Heres my best slip to date. This was with the following mods:
4.10s
O/R X and SLP Loudmouth IIs
Accufab 75mm TB/Plenum
MGW short throw
K&N w/ passenger side headlight removed (do this, it helps and only takes a minute)
SCT Safe Tune (unkown timing, etc because my tuners a turd and didnt send anything telling me what parameters were set to w/each tune)
245/45/17 Sumitomo HTR+ all-seasons
Removed front sway bar
1 110 lb passenger

Track prep was so-so at best, but the air was cool so that helped. I only spun the tires quickly to clean them up before staging. Launched @ 2500 rpms, feathered the clutch, took it to about 4500-5000 rpms in 1st before nailing 2nd, then let her rip, shifting between 5800-6000 rpms. I'm # 9018 on the right. Heres a vid of that run: http://media.putfile.com/113504



Im gonna go through some older slips and find some with similar times as yours and do a little comparison. Im probably just gonna tell you to keep practicing, because I ran terrible times my first few times at the track with most of these mods, 4.10s included.
 

Attachments

  • 3rdTimeatTrack.webp
    14.4 KB · Views: 133
G

GT02MG

New Member
Dec 11, 2004
49
0
0
MD
Apr 15, 2006
#11
  • Apr 15, 2006
  • #11
UDTBadkarma said:
Our cars stock are supposed to be doin 14.0-14.1 (professionally driven) flat. So there is room for improvement. I think that you can be pullin a 13.7, 13.8 with some good driving.
Click to expand...


Ive seen our cars pull 13.70s stock professionally driven....to bad we arent all Evan Smith though
I have trouble hooking in 2nd for some reason at the track even with stock gears....on the street I slam 2nd and it just chirps and keeps going but at the track im friggin sideways
 

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Apr 15, 2006
#12
  • Apr 15, 2006
  • #12
I think an MGW, Tri-Ax or Pro 5.0 shifter would serve you well. I was looking at some old slips of mine andcomared the to the one you postd. You were quicker through the first 330' by .15, and by the 1/8th we would be even, and by 1000' Im .2 ahead of you.

Now, not knowing exact power output of each car doesnt help, but looking at that trend makes me think quicker shifts has something to do with it considering our mods are similar.

I'd make an MGW your next mod and just keep practicing
 

03ghoststang

Well-Known Member
Jul 16, 2005
1,930
1
57
Los Angeles, California
Apr 15, 2006
#13
  • Apr 15, 2006
  • #13
not bad on the times my last runs were in an 1/8th track and go as follows:

R/T----.876

60'-----2.048

330----5.858

1/8----8.956

mph---79.44

this was done with stock gears and the mods on my sig through an automatic
 
G

GT02MG

New Member
Dec 11, 2004
49
0
0
MD
Apr 15, 2006
#14
  • Apr 15, 2006
  • #14
Yes def get a shifter...find whatever the best deal on one they all are the same and work a whole lot better than the stocker.
 

TweekedGT

New Member
Jul 22, 2004
1,274
0
0
Alberta
Apr 16, 2006
#15
  • Apr 16, 2006
  • #15
MOV (Margin of Victory) is the actual amount you beat him by, you combine the difference in your reaction time and your quarter mile times. So basically you beat him by .8XX seconds. You really kicked the crap out of him .
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Apr 16, 2006
#16
  • Apr 16, 2006
  • #16
GT02MG said:
Ive seen our cars pull 13.70s stock professionally driven....to bad we arent all Evan Smith though
I have trouble hooking in 2nd for some reason at the track even with stock gears....on the street I slam 2nd and it just chirps and keeps going but at the track im friggin sideways
Click to expand...


I went 13.903 stock LOL then went 13.89 with 4.10's, and tune
 

dustang50

Member
Jan 12, 2006
132
0
16
Cleveland, OH
Apr 16, 2006
#17
  • Apr 16, 2006
  • #17
Guess I just need to learn how to drive...
 
M

m3driver240

New Member
Apr 5, 2006
0
0
0
Apr 16, 2006
#18
  • Apr 16, 2006
  • #18
dustang50: nice time. got any pics?
 

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Apr 16, 2006
#19
  • Apr 16, 2006
  • #19
dustang50 said:
Guess I just need to learn how to drive...
Click to expand...
we all do man, the vast majority of this board is far from being considered expert drivers. Just keep practicing. After a few runs you'll get a slip thats .2 or .3 better than your previous best and you'll be thinking "How the hell did I do that?" My best day at the track I made about 8 runs, each getting progressively better. The difference in the first and last slip was .43! ( actually it was .6, but that was a missed 3rd gear )
 

dustang50

Member
Jan 12, 2006
132
0
16
Cleveland, OH
Apr 17, 2006
#20
  • Apr 17, 2006
  • #20
I'm still waiting for my wife to get the film developed from the track, but I'll post it when it's in. I took my wife's aunt, who has Downs Syndrome, on a run & I think the wife got a few pics of it. Pretty funny stuff - she loved it!
 
You must log in or register to reply here.

Similar threads

R
Suspension Drag Radial Issue
  • Rcdgl
  • Apr 7, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
234
Fox 5.0 Mustang Tech Apr 7, 2025
Noobz347
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
926
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
R
96 V6 Overheated, Heads Resurfaced, Valve Job, No Crank No Start Unless Jumping Ignition Fuse
  • RJohn69
  • May 29, 2024
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
477
1996 - 2004 SN95 Mustang -General/Talk- May 29, 2024
RJohn69
R
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
526
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?