Progress Thread Deals are still out there.

mattcrp1 · May 16, 2025

Some slight messaging of the heads

mattcrp1 · May 16, 2025

Not crazy just the flash and sharp edges. it came with Under cut valves as well.

mattcrp1 · May 24, 2025

Finally, one head assembled and installed!!!!

mattcrp1 · May 24, 2025

I am running the felpro 1011-2 head gasket and trick flow head bolt adapters

mattcrp1 · Mar 28, 2026

mattcrp1 · Mar 28, 2026

mattcrp1 · Mar 28, 2026

Been busy lately, got the old single exhaust and 4 lug 7.5 diff out and installed the rebuilt 8.8 and dual exhaust. It now has maximum motor sports lower control arms and 2002 bullit rear springs. I love how the 2.25 inch duals looks.

mattcrp1 · Mar 28, 2026

Old 7 5

mattcrp1 · Mar 28, 2026

My dad picked up a set of headers and off road h pipe for me. I need to make the drive to pick it up.

mattcrp1 · Mar 28, 2026

Front end is together and on the ground. I used the bumpsteer correcting tie rod ends. And started stripping the engine bay to remove the 4cyl turbo motor and paint the engine bay.

bdub_mkg · Mar 30, 2026

Can I ask why you ditched the turbo 4 and went with the v8? Besides the obvious power... curious as you dont see a lot of t4 out there.

mattcrp1 · Mar 30, 2026

The harness needed a lot work. I did a quick repair to the harness and it ran ok. I bought it mainly because it wasn't beat up. I love the 302 and have had many 87-93 fox's. The 84 was a decent deal to make what I wanted. I know a lot of people wont like the swap but this car was rotting away in a garage after the previous owner spent alot on the fuel system to try and fix the issue. This version of "efi" is not that great.

AeroCoupe · Apr 16, 2026

Its been two weeks...any updates on this project???

mattcrp1 · Apr 16, 2026

Hopefully this weekend. I did get the hybrid park brake cables in for the fox to sn95 calipers. The park brake mechanism in the pre86 cars does not have a spring in it so its a direct bolt in with no modification to the lever. I also got the pass side hard line and stainless flex line in and mounted. Looking to finish up on pass side this weekend with more pics.

AeroCoupe · Apr 16, 2026

So your car already has the adjustable cable between the brake handle and the cables?

mattcrp1 · Apr 16, 2026

Nope, its fixed. I contacted LMR and explained what I had and what I was trying to do. The tech Iconversed with stated my set up only required the hybrid cables.

The kit for the drum to disc park brake cable conversion that LMR sells is only for the later foxbody's due to the spring and self adjusting mechanism they want welded in the later park brake handle. The earlier vehicles don't have that.

It is almost fully installed on my set up and ill try and post pictures this weekend.

mattcrp1 · Apr 18, 2026

Here are a few pics

mattcrp1 · Apr 18, 2026

A clear pic of the adjustment rod located at the base of the park brake handle.

mattcrp1 · Apr 21, 2026

AeroCoupe said:
So your car already has the adjustable cable between the brake handle and the cables?

Yes, the 4 eye cars have the adjustment inside the car under the handle. It made the install very easy and fast.

mattcrp1 · May 2, 2026

I modified the fuel system and updated it. I removed the rail pump and wiring. I removed the resister on the ground side of the I tank pu.p to make it like the 87-93 mustangs. The splice for the resister as shown in the schematic is in the hatch area near the grommet for the pump.

Progress Thread Deals are still out there.

Active Member

Attachments

Active Member

Active Member

Attachments

Active Member

Attachments

Active Member

Active Member

Active Member

Active Member

Attachments

Active Member

Active Member

Attachments

Member

Active Member

lube between the nut and the face. I know my lubes

Active Member

lube between the nut and the face. I know my lubes

Active Member

Active Member

Attachments

Active Member

Attachments

Active Member

Active Member

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency