Determining If I Have A Missing Canister Purge Solenoid.

Mustang5L5 said:

In that case

50 degrees F = 58.75 K ohms


Don't stress out about exact value. Just see if you are in the ballpark. WHen those sensors fail, they fail either open or are waaaay off.


I'll pull my canister wiring apart later and take pics

Click to expand...

90sickfox said:

This is what you need. At latemodelrestoration.com its $26...

That harness is missing on your car....it plugs in by the ect sensors and runs down beside fuel rails and over the purge solenoid.

I looked up an 88 mustang 5.0.... Purge solenoid harness and Bam!!! There it is [emoji14]

Click to expand...