Disk in rear require new mc?

[billison]

I might be able to get a rear end for my car with disk brakes. Will i have to get a new master cylinder? what eles would i have to do to install it?


The car is a 85 former cfi 5.0, thanks

and i'd rather NOT mess with the master Cylinder, thanks again

 

[bill302]

are they sn95 disc brakes????If you plan to go to rear disc brakes, then the 2 port MC will be required along with the FMS M-2450-A plug and an adjustable proportioning valve.
copied from the link below click on link for more info..


http://www.moddedmustangs.com/forums/brake-upgrade-information-vt271.html

 

[Shakerhood]

Yes you need to change the M/C

 

[jrichker]

See Matt90GT's website, http://www.svo73mm.cjb.net/ for all the information you need. I have a Turbo Coupe rear axle with disk brakes, and Matt90GT's site had all the info I needed to do the swap.

A new M/C isn't a big deal. Follow the recomendations on Matt90GT's website and you will be right on target.

 

[Flavadave4]

See Matt90GT's website, http://www.svo73mm.cjb.net/ for all the information you need. I have a Turbo Coupe rear axle with disk brakes, and Matt90GT's site had all the info I needed to do the swap.

A new M/C isn't a big deal. Follow the recomendations on Matt90GT's website and you will be right on target.

I sencond that, very good reading on that site.....lots of info

 

[billison]

OK one more question, do i need to update my brake booster? with my car being a 85 i'd think i would, but dunno

 

[Shakerhood]

OK one more question, do i need to update my brake booster? with my car being a 85 i'd think i would, but dunno

If you plan on upgrading to SN95 Brakes front and rear then I would do the Booster as its easier to just do it while you have it apart.