Has anyone ever opened up a tweecer? I'm curious if it could be cloned or if someone could build a diy version. i.e. you have two cars and only one tweecer.
Adam
Adam
DIY or Clone a Tweecer R/T ?
- Thread starter talladam
- Start date
That's a doozy of a question for your first post...
Welcome to the board.
I wouldn't even try to copy one. Too much time...
If you are looking into using a tweecer on multiple vehicles, then there are other ways.
Check out Moates.net
They have some hardware and software that will allow you to burn your custom .bin file to a J3 chip, which can stay on the ecu.
That is the best option I am aware of...
jason
Welcome to the board.
I wouldn't even try to copy one. Too much time...
If you are looking into using a tweecer on multiple vehicles, then there are other ways.
Check out Moates.net
They have some hardware and software that will allow you to burn your custom .bin file to a J3 chip, which can stay on the ecu.
That is the best option I am aware of...
jason
