Do i have to replace my distributor cap yet?

BLADDER92FOX

Member
Apr 4, 2005
153
0
17
Miami
I was just outside replacing my pcv valve and breather and doing some other maintenance stuff on my day off.When i took my plugs off the ditributor cap i noticed that the pins were a copper color and the middle one that goes to the coil is silver.If i remember right they all used to be silver,my cap is an msd btw. Do i have to replace it?It been almost a year and a half since i did that.
 
I would just replace it that and the rotor. They arent that much and for peace of mind its cheap. Check your plugs sometimes its good to change everything all at once if you can afford it.


BLADDER92FOX said:
I was just outside replacing my pcv valve and breather and doing some other maintenance stuff on my day off.When i took my plugs off the ditributor cap i noticed that the pins were a copper color and the middle one that goes to the coil is silver.If i remember right they all used to be silver,my cap is an msd btw. Do i have to replace it?It been almost a year and a half since i did that.
 
Yea,i was thinking of doing that today,but now i can't cause it raining and i have to go out later on,on Friday i'll do it since its my next day off.I might paint my rims that day too so i will have to wake up early to to all those things.
 
On the base, look for cracks in the plastic. Hold it up against a bright light to help you search for the cracks... If there aren't any than you are fine. If you see some, it's time for a new base.
 
I was just looking at the msd dist caps and they do come with the middle pin in silver and the rest in copper or gold(whichever color it is). I know my plugs have about 12,000 miles on them,i just have to take them out and check them to see if they are still good.