• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Do my ears deceive me?

  • Thread starter Thread starter 302RollinHard
  • Start date Start date Apr 4, 2006

302RollinHard

New Member
Sep 26, 2005
0
0
0
Columbus, OH
Apr 4, 2006
#1
  • Apr 4, 2006
  • #1
I got my fresh 306 put in a week and a half ago. It was loud as heck compared to the stocker I took out. At any rate, I took her for a 260 mile drive (highway and some city) to brake her in and get the clutch nice and warm. Parked her from sunday to this evening, and took her for a spin. She sounded like she was on muscle relaxers. She also didn't seem to pull as hard as she did on the drive last weekend. The car ran well and ran smooth. One thing that was strange, since the install I have been fighting the surging idle problem, and this eve she slightly backfired. I am in the process of checking for vaccuum leaks, and resetting the tps. Long story short, could the mufflers actually "break in" to the new engines noise?? Or did my ears get used to the pronounced drone and louder engine??? And hopefully the evenings weak performance was imagined by myself.
 
M

Marlboro_Man

Member
Sep 30, 2005
437
1
18
Houston, TX
Apr 4, 2006
#2
  • Apr 4, 2006
  • #2
Change your oil yet?
 

302RollinHard

New Member
Sep 26, 2005
0
0
0
Columbus, OH
Apr 4, 2006
#3
  • Apr 4, 2006
  • #3
This batch of oil only has 300 miles on it. The engine has ~500 miles on it at this point. What will that help, if you don't mind my asking? the oil looked clean before the drive, haven't looked at it since though. Will check it out. The oil pressure is fine, if that helps/matters
 
B

big_tiger15

New Member
Sep 13, 2004
88
0
0
Arlington, Texas
Apr 4, 2006
#4
  • Apr 4, 2006
  • #4
check your vacuum.
 
M

Marlboro_Man

Member
Sep 30, 2005
437
1
18
Houston, TX
Apr 5, 2006
#5
  • Apr 5, 2006
  • #5
302RollinHard said:
This batch of oil only has 300 miles on it. The engine has ~500 miles on it at this point. What will that help, if you don't mind my asking? the oil looked clean before the drive, haven't looked at it since though. Will check it out. The oil pressure is fine, if that helps/matters
Click to expand...
It was just a thought, I Know you are supposed to change your oil several times in a short period after a rebuild. Also if you changed it and found shavings in the oil that could be a bad sign and might explain the power loss you spoke of.

Free bump for you.
 
You must log in or register to reply here.

Similar threads

Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
S
Help with window and possible engine
  • StefRena22
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2025
Willybill32
Engine No compression
  • Andresquintana.mma
  • Aug 13, 2023
  • Fox 5.0 Mustang Tech
Replies
7
Views
2K
Fox 5.0 Mustang Tech Aug 22, 2023
JD1964
I feel like I'm chasing my tail with this thing
  • LILCBRA
  • Oct 23, 2023
  • Other Auto Tech
  • 2
Replies
36
Views
6K
Other Auto Tech Apr 12, 2024
LILCBRA
98 GT PI Swapped Engine Fires, Dies Immediately NOT PATS
  • MMccPerformance
  • Dec 2, 2023
  • SN95 4.6L Mustang Tech
Replies
3
Views
2K
SN95 4.6L Mustang Tech Dec 20, 2023
Yel2002GTAuto
Y
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?