door molding idea

[hsean]

would like to fill in the area where the stripe normally goes,what kind of rubber/plastic like filler to use and smooth out with?saw it on this green t-top mustang in last months issue of modified mustang and looks really cool.

 

[88mouse]

i wouldn't put that much filler in there its going to crack and fall out i think.

 

[hsean]

theres got to be some kind of epoxy or special urethane filler

 

[Hickfied]

i'd fiberglass it so if you don't like it, you can rip it off and put your moulding back on.

 

[bobbyd]

hey guys pm the back of the door moldings if the metal strips are a little broken is there any way to fix them or can i take them out? or replace them with something else?

 

[grey5.0beast]

take off themetal strips, you don't needthem and lay the mouldings somewher flat and they will straighten out. Use a blowdryer if you need to help get some of the glue off.

 

[bobbyd]

take off themetal strips, you don't needthem and lay the mouldings somewher flat and they will straighten out. Use a blowdryer if you need to help get some of the glue off.

ah coo thanks i though i had read somewhere that not to remove those metal strips but i will remove them hehe. what kind of double tape should i put on them?

 

[Mr. Rustypwnz]

get some 3m tape and be done.

 

[grey5.0beast]

 

[bobbyd]

get some 3m tape and be done.

yea thats what im going to be going with just searched on google for double sided 3m tape and see a few different ones.

thanks for the info help guys i should finish this tomorrow

 

[grey5.0beast]

get the thin, wide white kind that ricers use to holdon their body kits.