• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Drag racing question..*

  • Thread starter Thread starter loraine70mach1
  • Start date Start date Aug 7, 2005
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

loraine70mach1

New Member
Jul 6, 2005
7
0
0
Small Town, North Carolina
Aug 7, 2005
#1
  • Aug 7, 2005
  • #1
Hey ya'll.
Alrite, here's the deal:
I am a 16 year-old female who absolutely loves old mustangs. I have a 1970 Mach 1 & I love it.

My boyfriend is having an annual get together and everyone's taking their cars to the local Test-n-Tune here sometime in the near future.

I hopefully plan to take my car up there because there is a jerk who thinks he can beat me.
I'm not so positive I can win, but I think I have a good chance.

Do ya'll think that a 1976 Camaro with a 305 will beat my Mach 1 with a 351C?
I have a 3 and a quarter rear.
I'm not sure whats in his, but I'm pretty sure it's stock.

I need some encouragement here, so all help would be greatly appreciated.
Also if you have any advice about first-time drag racing, please reply.

Thanks in advance.
Tiffany*
 
1

19stang66

Member
Apr 16, 2003
689
0
16
Aug 7, 2005
#2
  • Aug 7, 2005
  • #2
All I can say is that your the only 16 year old girl I know who loves classic stangs. Wish some of them lived up here in Minnesota.
 

iskwezm

10 Year Member
May 24, 2005
4,159
20
79
Rowland Heights,California
Aug 8, 2005
#3
  • Aug 8, 2005
  • #3
you both will probably run in the 16's in the quarter or high 10's in the 1/8th.Your best bet is get him at the light and just hold him off till the end.
 

rbohm

Founding Member
Apr 12, 2002
6,698
550
204
tucson,az
Aug 8, 2005
#4
  • Aug 8, 2005
  • #4
leave on the last yellow and pull a holeshot on him. however dont have the engine revs about 2000 rpm when you do otherwise you will spin the tires too much and he may walk past you. if your 351c is in proper tune, you should be able to lay a solid whipping on him, assuming you drive the car right also. if you have an automatic, hold first gear untill you feel the engine start to nose over(lose power), this will be around 5500 rpm. then shift to second, and do the same thing. same if you have a 4spd, but dont be gentle with the shift with the 4spd, you want to grab the next gear as fast as possible.
 
M

my66coupe

Founding Member
Apr 30, 2002
1,134
0
36
Arizona fountain hills
Aug 8, 2005
#5
  • Aug 8, 2005
  • #5
305= peice of junk.......IF your mach is in proper tune....and his is stock I dont doubt that your mach will rock........

Mike
 

Vinyl66

Member
Mar 21, 2004
398
0
16
Aug 8, 2005
#6
  • Aug 8, 2005
  • #6
Now that's refreshing! A 16 year old girl who loves classic Mustangs. THat's great!
The others are right that a 351C in good tune should beat a stock 305 Chevy. If you are lining up against him, then definitely leave on the last yellow light. If you wait till you see green, you lose.
When you stage: after the pre-stage lights are on then "inch" into the staging lights and stop immediately when the light comes on. Now, left foot on the brake and right on the gas. (for an automatic) Get rpm's at around 1000 and give it as much gas off the line to spin the tires just a little. Racing with street tires you will know you are at the edge of traction if you spin just a little.
If automatic then shift it yourself. I think 5500 sounds about right to shift at as well. You will have to experiment to see where the car likes to be shifted though. Shift "just" as you feel the car stop pulling hard.
Good luck!
 

2nd Mustang

Founding Member
Feb 24, 2002
2,488
0
46
Southern California
Aug 8, 2005
#7
  • Aug 8, 2005
  • #7
76, 305=smog motor. Above all, be safe.
 
S

steel1212

Active Member
Jun 24, 2004
1,180
0
36
Frankfort, Ky
Aug 8, 2005
#8
  • Aug 8, 2005
  • #8
also let us know the outcome!
 
M

mustangman70

Founding Member
Dec 30, 2001
1,235
1
0
St pete, Florida
Aug 8, 2005
#9
  • Aug 8, 2005
  • #9
Also if for some reason your boyfriend never works out theres alot of young stang guys in here to talk to ya

Let us know on your time
 

Stang_1973

Founding Member
Jul 13, 2001
565
9
38
San Antonio, Tx.
Aug 8, 2005
#10
  • Aug 8, 2005
  • #10
Its great to here of fellow young classic stangers. Especiallly when they are girls. If its any help, a friend of mine had a '77 Camaro. I killed him in my '73, 302 with a mild street cam.

Those 351 clevelands are capable of putting down some serious power.
BTW- got any pics?
 

krash kendall

Active Member
Nov 19, 2004
1,258
0
36
Aldergrove, B.C. Canada
Aug 8, 2005
#11
  • Aug 8, 2005
  • #11
my66coupe said:
305= peice of junk.........

Mike
Click to expand...

Yes, especially if it is stock and has some miles on it. The camshaft will be as flat as a broomstick.
 

chepsk8

Founding Member
Jan 15, 2001
2,203
3
49
Easton, PA
Aug 8, 2005
#12
  • Aug 8, 2005
  • #12
Tiff,

When I ran the second Shoot-out for Mustang Illustrated a ways back, we had a 72 351 Cleveland 4-speed Mach run, and it finally got into the high 14's. Very much a street car, but in good tune. The trick is to get it off the line quick & clean, and let the motor wind up. Those Clevelands love higher revs.

If you want, I should be able to find a pic of the car at that event.
 
C

candyapple

New Member
Dec 29, 2003
68
0
0
Aug 8, 2005
#13
  • Aug 8, 2005
  • #13
I'd like to know what track so I can watch. I live near Charlotte, NC and my brother and I race a Mustang in Mooresville
.
 

loraine70mach1

New Member
Jul 6, 2005
7
0
0
Small Town, North Carolina
Aug 8, 2005
#14
  • Aug 8, 2005
  • #14
Thanks for all the advice ya'll.
I really appreciate it. It will be put to good use.
At the moment I only have one picture of the car on this computer, but I'll get more later.
http://pg.photos.yahoo.com/ph/rocker_redneck_cutie/detail?.dir=9c2c&.dnm=bf8c.jpg&.src=ph

I really hope I kick his butt, because he's a real jerk.

Btw: candyapple - It's gonna be at Farmington Dragway.
I don't know the exact date yet though.
We've all gotta get our cars in great condition and get in some practice.

But thanks 2 everyone & if me and the boyfriend don't work out I know where to find guys into the same thing as me, lol!
 

chepsk8

Founding Member
Jan 15, 2001
2,203
3
49
Easton, PA
Aug 8, 2005
#15
  • Aug 8, 2005
  • #15
Here's the 70 Mach 1 I used in both Shoot-Outs, 351C 4-speed, 3.50 gears, and on the cover of Mustang Illustrated in 2000. Neat car, ran easy 14.5's, mostly stock.

View attachment 507625

Get some sticky rubber, practice launching, you'll embarass the Camaro!

I used to have this 69 SCJ, easy 13.8's in full street dress! Launching was very hard, as I had to "Granny" it off the line to avoid wheelspin. Once it was hooked up, it just ran like a freight train!






(Wish I was younger, you're very cute! see this thread...http://forums.stangnet.com/showthread.php?t=570415 )
 

Attachments

  • Mach1.webp
    46.8 KB · Views: 168

chepsk8

Founding Member
Jan 15, 2001
2,203
3
49
Easton, PA
Aug 8, 2005
#16
  • Aug 8, 2005
  • #16
Here's her car, very nice!!

View attachment 507623
 

krash kendall

Active Member
Nov 19, 2004
1,258
0
36
Aldergrove, B.C. Canada
Aug 8, 2005
#17
  • Aug 8, 2005
  • #17
chepsk8 said:
Wish I was younger, you're very cute!
Click to expand...


Why do we always have to scare away the new girls?


View attachment 507621
 

chepsk8

Founding Member
Jan 15, 2001
2,203
3
49
Easton, PA
Aug 8, 2005
#18
  • Aug 8, 2005
  • #18
Exposed!

Ya had to do that! Now EVERYONE know's I'm a partyer!
 

krash kendall

Active Member
Nov 19, 2004
1,258
0
36
Aldergrove, B.C. Canada
Aug 8, 2005
#19
  • Aug 8, 2005
  • #19
Glad you see the humour in it! I posted that with some trepidation!
 

chepsk8

Founding Member
Jan 15, 2001
2,203
3
49
Easton, PA
Aug 8, 2005
#20
  • Aug 8, 2005
  • #20
No problem, as long as we all can laugh at ourselves! I hope she doesn't mind!



(BTW, good thing you didn't post the other pic!)
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

T
New here, just saying hi.
  • Tank Mechanic
  • Nov 1, 2025
  • The Welcome Wagon
Replies
2
Views
210
The Welcome Wagon Nov 2, 2025
nickyb
New Exhaust for 408w stroker
  • SadbutTrue
  • Sep 10, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
136
1965 - 1973 Classic Mustangs -General/Talk- Sep 10, 2026
nickyb
5
Hello fellow Mustang fanatics.
  • 580HP*428Cj
  • Apr 2, 2026
  • The Welcome Wagon
Replies
4
Views
330
The Welcome Wagon Aug 18, 2026
josep4
A
Procharger install/prep questions
  • ahratrew
  • Nov 22, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
440
SN95 4.6L Mustang Tech Nov 26, 2025
Noobz347
Rear Disc and Rims Offsets
  • TripleYellow
  • Nov 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 9, 2026
TripleYellow
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?