Draglite/Tire sizes please!

i just went through the same exact dilemma as you and after much research I went with the 15X10 draglites with 6.5" BS. I too am going to run a 28" tire .. most likely either MT or BFG drags 325/50/15. I just ordered them a few weeks ago and got them.. I have not got the tires yet so I have not fitted the wheel on with the tire, but I did put the rim on and it looks like it lines up perfectly even with the wheel fender, also it looks like my exhaust MAY clear.. but I know once I get the tires on there that it might hit, so I too might run dumps if it comes to that. I would say just go with the 10" rims and make it work, from what I seen just by putting the rim on it looks like it should fit pretty good.. it is a little close the the inner fender though by the rear springs but I think it will be ok. I am getting tires either this week or next and will be mounting them so if your not in a rush I could let you know how they fit and what exactly I had to do to fit them in. From the research I've done though I think the only thing you really gotta do is roll the fender lips, bang a little inner fenders if needed, remove quad, and possibly move exhaust over or cut to dumps.. so it sounds like you've researched as well. I was real paranoid and confused too before I ordered them and felt like I was taking a big chance or something because they might not fit, but after getting them and putting the rim on, I am happy with the decision I made. So go for it...

heres some pics too.. i didnt take any of them on the car though.. guess I shouldve.. but I know someone else on these forums has a pic of this rim on their fox.. do a search for 15X10 and you will get a lot of good results.

Get a 7-10lb sledge hammer and go to town on your inner fender. You are going to have to push the innerwell all the way to the spring pretty much.

Hey K.C I saw your car on the motown muscle board, looks and sounds real good!

thanks! I'm in the process of changing a bunch of parts and doing some more paint work to the trim so im hoping it will look even better

built50 said:

Hey K.C I saw your car on the motown muscle board, looks and sounds real good!

Click to expand...

Ya, I just recolored my entire dash and most of my interior panels also.

all you should have to do is roll the fender lip. and tirerack has a loaner tool for that.

ImportEater98 said:

I am in no hurry to order my rims/tires. Please post pics/info on your install as soon as its complete. I'm so glad someone is in the same boat as me. You know how it goes on stangnet, some guys just "talk to hear themselves talk", as opposed to knowing exactly what they are talking about. Thanks again for the prompt response, and please keep me posted on your progress. Sweet car, by the way

Click to expand...

I know what you mean.. i'm the same way.. I'll be sure to take plenty of pictures and let you know what I had to do to get it on there. I might end up renting out that roller tool from tirerack because I'm probably ordering my tires from them anyways. oh and thanks for the compliment..

I bought these and am gonna put 275/50/R15's on them. The wheels are 15x10" draglites w/ 6.5" backspacing w/ 275/60/R15 Goodyear Wingfoot tires. I don't like how tall they are. I haven't put them on the car yet to see how it looks or to take pictures because I haven't been able to flip my quad shocks yet. I'll probably sell the tires, but here are some pics just so people know how this looks (the camera angles are bad, and don't depict the actual measurements, so I put those on there as you can see):

I finally got them on ... GO to this thread.. i started a new one.

http://forums.stangnet.com/showthread.php?t=543061