Dragon Plenum Installed................

[TacBear]

The car feels stronger! I floored it at 2500 rpm in 1st gear and lit the tires, shifted to 2nd (NO powershift) and the tires spun so bad that I had to back out. The car has never spun that badly.

Here are some Pics:

BEFORE and AFTER

 

[scheister]

I'm waiting for Tim's dyno results

 

[TacBear]

Comparison of Dragon to the Stock Plenum.

 

[TacBear]

Last one, Pic of the intake side of the Dragon and the Stock Plenum!

 

[scheister]

Last one, Pic of the intake side of the Dragon and the Stock Plenum!

Nevermind...I just found it:


Red Dragon Dynograph

 

[Yellow4.6]

What's the diameter of the opening on the Dragon?

Looks good!

 

[Beau]

how easy was it to install?

 

[TacBear]

What's the diameter of the opening on the Dragon?

Looks good!

75MM

how easy was it to install?

On a scale of 1 to 10 it was a 2 The only problem was getting the EGR bolts off. I had to put the Stock Plenum in a vise and use a breaker bar.

 

[Beau]

what/where are the EGR bolts?

 

[TacBear]

what/where are the EGR bolts?

They hold the EGR valve on

The EGR valve is on the oposite side of the inlet (it has a vacume diaphram on top of it and a steel tube that runs down to the exhaust manifold on the drivers side).

 

[Beau]

oh ok thanks..i'm just visualizing it in my car thats all

 

[TacBear]

oh ok thanks..i'm just visualizing it in my car thats all

 

[tangerine]

where did you buy it from and how much did it cost. what size and what throttle body(namebrand).

 

[neoclasiccl]

Looking good. That is a nicer looking peice compared to the C&L I used to have

 

[TacBear]

where did you buy it from and how much did it cost. what size and what throttle body(namebrand).

Stefan is just getting his business going so you will have to call him on the telephone.

Dragon Intake Plenum

 

[COramprat]

I still like the little horsey. As far as EGR bolts use some PB Blaster on them. THat stuff works great. I'm torn now between the C&L and the Dragon. I guess I'll wait a little longer for some more opinions and results.

 

[tangerine]

has anyone tested the dragon plenum on a 96-98 gt to see how much power they make

 

[madmatt]

Thats a good looking plenum. I just wish u could get one that didnt have the dragon thing painted in. I think it would look cleaner. I still wanna see a side by side comparison between the c&l, dragon, trickflow, and accufab.
Matt

 

[TacBear]

has anyone tested the dragon plenum on a 96-98 gt to see how much power they make

I haven't seen a test on a 96 to 98

 

[bg00gt]

dragon