Hey guys, I need help with this. I am going to be dropping the front of my car really soon. There is just too much wheelwell gap for me with the skinnies. It really needs to come down at least 2 inches, I think that would be plenty. The concern is this. I already have Moroso Drag springs in the rear, it's not lower, but they compress really easily for launch, plus I run 275/60/15 BFG Drag Radials, and they fit really nice with no rubbing, but I don't want a really stiff spring in the front, that would just make the car ride worse than it already does. I was considering 4 cyclinder front springs, will this bring it down the 2 inches I want? I was also considering Moroso Drag Springs for the front, but I didn't know if they would lower it without having to cut the spring. If I cut the spring, will it ruin what it was designed for? I don't mind cutting the spring, I just don't want it to not transfer the weight correctly. Any help you guys could give will be greatly appreciated. Thanks in advance.