As you can tell i need to get a cam for this motor.
Curently have a stage 1 TQ 2400 stall, fully built AODE.
I would be willing to up the stall speed to 2600 max i would rather not change it.
These aer my 2 options before going to some sort of custom cam..
N-41
302-347 c.i.d. This cam is to be used with 1 7 R.R. Great with TFS or Edelbrock heads. Minimum 30lb injectors and 80mm mass air. Recommend 3.73 to 4.30 gears. Good drivability down to 2100 rpm, lumpy idle, rpm range 2600-6200, works best with 89-93 EEC, needs 2800-3000 converter.
N-412
302-347 c.i.d. This cam is to be used with 1.7 R.R. Great with TFS or Edelbrock heads. Minimum 24lb injectors and 75mm mass air. Recommend 3.55 to 4.10 gears. Great drivability down to 1900 rpm, nice idle, rpm range 2400-6200, works best with 89-93 EEC, needs 2500-2700 converter.
Curently have a stage 1 TQ 2400 stall, fully built AODE.
I would be willing to up the stall speed to 2600 max i would rather not change it.
These aer my 2 options before going to some sort of custom cam..
N-41
302-347 c.i.d. This cam is to be used with 1 7 R.R. Great with TFS or Edelbrock heads. Minimum 30lb injectors and 80mm mass air. Recommend 3.73 to 4.30 gears. Good drivability down to 2100 rpm, lumpy idle, rpm range 2600-6200, works best with 89-93 EEC, needs 2800-3000 converter.
N-412
302-347 c.i.d. This cam is to be used with 1.7 R.R. Great with TFS or Edelbrock heads. Minimum 24lb injectors and 75mm mass air. Recommend 3.55 to 4.10 gears. Great drivability down to 1900 rpm, nice idle, rpm range 2400-6200, works best with 89-93 EEC, needs 2500-2700 converter.