• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Dust Shields

  • Thread starter Thread starter Fuzion
  • Start date Start date Jun 1, 2006

Fuzion

Member
May 24, 2005
81
0
6
Virginia
Jun 1, 2006
#1
  • Jun 1, 2006
  • #1
Incredibly I have collected all of the pieces I need for my 5-lug conversion in exactly one month. YAHHH!!!
Cept for my dust shields......
I have been hearing mixed opinions on which ones to use. I am going to be installing 13 inch rotors with Bullitt pbr calipers in the front and 11.65 inch in the rear.
Im using 94 spindles and northracecar brackets in the rear.
Which ones do I need?
Thanks
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Jun 1, 2006
#2
  • Jun 1, 2006
  • #2
In my opinion, why would you go through all that trouble and put nice brakes behind a nice set of 17s if you're just going to cover it all up? That's what they make brake/wheel cleaner for!
 

Fuzion

Member
May 24, 2005
81
0
6
Virginia
Jun 1, 2006
#3
  • Jun 1, 2006
  • #3
so dust shileds aren't needed?
i do want them to look good but more importantly i want them to perform at their best and last a while too.
thanks for the input im a brake noob...
 

87ttopstang

Member
Apr 14, 2003
342
0
17
Ontario, Canada
Jun 1, 2006
#4
  • Jun 1, 2006
  • #4
85_SS_302_Coupe said:
In my opinion, why would you go through all that trouble and put nice brakes behind a nice set of 17s if you're just going to cover it all up? That's what they make brake/wheel cleaner for!
Click to expand...


Dust shields go behind the rotors not in front.

I have the exact same setup. Here are the part #'s. These are ford part #'s by the way.

Front - f4zz-2k005-a
f4zz-2k004-a

Rear - f4zz-2c028-a

Those are the shields you need.
 

Ozz

I think I have a problem here.
Founding Member
Jul 27, 2001
3,514
66
109
Canton, MI
Jun 1, 2006
#5
  • Jun 1, 2006
  • #5
I just went to the Ford dealer and got 94 Cobra shields . Then I didn't even use the front ones It still stops the same, even in pouring rain which I've sadly had to deal with a couple times thereafter. (damn car shows/bad weather!)
 

Fuzion

Member
May 24, 2005
81
0
6
Virginia
Jun 1, 2006
#6
  • Jun 1, 2006
  • #6
I'm just going to get them for peace of mind...
heard they only cost about 10 bucks earch rite?

87ttopstang:
Thanks for the info bro..
two different part numbers for the front, left and right and only one part number the rear? or should i look for the part number for the second rear. im calling the dearler soon.
 

Ozz

I think I have a problem here.
Founding Member
Jul 27, 2001
3,514
66
109
Canton, MI
Jun 1, 2006
#7
  • Jun 1, 2006
  • #7
They should be $10 or under each. Real cheap.
 

87ttopstang

Member
Apr 14, 2003
342
0
17
Ontario, Canada
Jun 1, 2006
#8
  • Jun 1, 2006
  • #8
Fuzion said:
87ttopstang:
Thanks for the info bro..
two different part numbers for the front, left and right and only one part number the rear? or should i look for the part number for the second rear. im calling the dearler soon.
Click to expand...

The rears are the same. The fronts are different for each side. They were around $10-12 each. Don't get the rivets to attach them. I just used some 1/4" bolts with some washers and nylon lock nuts. Just make sure the bolts are not too long.
 

Fuzion

Member
May 24, 2005
81
0
6
Virginia
Jun 1, 2006
#9
  • Jun 1, 2006
  • #9
Great, thanks a lot for the info guys!
i hate rivets, i had to deal with them when i was taking the stock busted dustshileds from my 94 spindles from the junkyard.
thanks again!
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Jun 1, 2006
#10
  • Jun 1, 2006
  • #10
87ttopstang said:
Dust shields go behind the rotors not in front.
Click to expand...


OOOOhhh, i was thinking of those disks they used to sell to keep brake dust from getting on your rims...those were stupid looking.
 
You must log in or register to reply here.

Similar threads

W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
308
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
8
87 lx 4cyl to v8 project 4 lug disc conversion questions
  • 87lx428
  • Mar 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
635
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 25, 2026
87lx428
8
Rear Disc and Rims Offsets
  • TripleYellow
  • Nov 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 9, 2026
TripleYellow
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
37
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 18, 2026
AeroCoupe
Cobra Brake Conversion - Spare Wheel/Tire Search
  • AeroCoupe
  • Aug 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
517
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 2, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?