Dyno run

westgastang5.0Coyote · Mar 1, 2010

You're being called out for good reason. Now let's see those mods!

d98gt · Mar 2, 2010

It's really not too crazy of numbers It's obviously going to be a dynojet dyno and each one will throw down different numbers due to how they calib it.

I'm looking into purchasing some BBR cams for the car as I have been impressed with their parts so far A nsr cammed 3v with a few bolt ons could easily be 330-340 (or 350 if you are one that chases high numbers on the roller rather than low number at the 1320')

tank_567 · Mar 2, 2010

My buddy Lightblade on here did full bolt ons and made 315rwhp, installed cams and built bottom end for boost and made 15 more rwhp. I dont see how that its possible.

Rickyll7 · Mar 2, 2010

R Martin said:
There is no BS bradleyem is my brother-in-law and when I bought my SLP LM he ran out and bought so I changed. And I did add some mods and didn't list.... And again no BS:Zip2:

You think your brother-in-law is incapable of reading up about mods himself? You think he will only get something if you get it first?

Again...

1991notchbackLX · Mar 2, 2010

View attachment 228183

bradleyem · May 8, 2010

Yeah, lets see the dyno sheet.

KBExperience · May 8, 2010

Really? You just brought up a 2 month old thread? Not only a thread, but a worthless one at that..

bradleyem · May 8, 2010

Yeah, lol I didn't look at the date. I just was searching for an old thread of mine when I came across this one because my user name was mentioned in it. I hadn't seen this thread previously. Thats ok, I got a good out of it....

bradleyem · May 8, 2010

And whats even funnier is that I just noticed that it was posted in SN95 4.6 Talk.

R Martin · May 10, 2010

bradleyem said:
And whats even funnier is that I just noticed that it was posted in SN95 4.6 Talk.

That's ok dumbass it was a mistake on where I put this. but at least my house is not being foreclosed on. And how was court today..

CatmanJJ · May 10, 2010

bradleyem said:
And whats even funnier is that I just noticed that it was posted in SN95 4.6 Talk.

R Martin said:
That's ok dumbass it was a mistake on where I put this. but at least my house is not being foreclosed on. And how was court today..

DATE - COURTROOM: 05/10/10
TIME - COURTROOM: 09:00 AM
COURTROOM LOCATN: FORECLOSURE MEDIATION
375 S. HIGH STREET
16TH FLOOR
COLUMBUS, OH 43215-8465
HEARING TYPE DESC: FORECLOSURE MED
NOTICE REQ IND: N
NOTC RET ADDR DSC: CLERK OF COURT OF COMMON PLEAS - CIVIL DIVISION
NOTICE MAIL DATE: 03/11/10

This thread got weird. :Zip2:

billfisher · May 10, 2010

hotmustang331 said:
Hmm 345 is not easy to hit by any means n/a on a 3v. You would need every Bolton in the book. Lts, o/r x pipe, catback, CAI, throttle body, u/d pullies, and a sick dyno tune.
A bud of mine has FULL exhaust and cai with a canned tune and made 300rwhp.
You gained almost 100rwhp N/A over stock...most cammed guys are barely making 345 from what I had seen

the highest bolt-on rwhp is 322 i have EVER seen.

he has to have stage iv cams or equivilent. everything. max is usually ~360rwhp. he also has to have EXACTLY the right combination for it to get high.

our club has a fellow with everything there is, and he gets 342rwhp/332 rwtq.

ninjastang125 · May 10, 2010

Wow is all I have to say. You really had to put homeboys business out there like that?

bradleyem · May 10, 2010

Not that I need to defend myself, but yes, I had some financial issues, and they started foreclosure proceedings on my home. I did a loan modification months ago, but the bank that I had the mortgage through was being taken over through a government siezure. It has taken the new bank until now to transfer the information on my account and the modification agreement, so I have had to go to several mediation meetings to get it all straightened out. But, luckily the new bank has been great to work with, and they adopted the existing modification agreement and even lowered my payments

This is a Mustang forum, not a "lets air out everyones personal information" forum, so I will refrain from bringing up the OP's MANY personal issues.

But, I KNOW for a FACT that his car is not putting down anywhere near those numbers. I doubt that he has ever had it on a dyno. And he hasn't the slightest clue what he is doing when it comes to wrenching on a car.

He's already been called out on his numbers, and he hasn't been able to back them up. If he really wants to prove it, then I'll be glad to :Track:

Any time, any day.

bradleyem · May 10, 2010

Also, you may want to read the forum rules:

THE FORUM RULES.....READ!!!

--------------------------------------------------------------------------------

General Rules:

* While debating and discussion is fine, we will not tolerate rudeness, insulting posts, personal attacks or purposeless inflammatory posts. Our decision is final in these matters.

So, someone who has not made a single constructive post on this forum should certainly be banned for this type of activity.

rabidscoobie · May 10, 2010

View attachment 219829

bradleyem · May 10, 2010

bradleyem said:
Also, you may want to read the forum rules:

THE FORUM RULES.....READ!!!

--------------------------------------------------------------------------------

General Rules:

* While debating and discussion is fine, we will not tolerate rudeness, insulting posts, personal attacks or purposeless inflammatory posts. Our decision is final in these matters.

So, someone who has not made a single constructive post on this forum should certainly be banned for this type of activity.

EDIT: I retract my statement about him being banned.......keep him here for the entertainment value alone

R Martin · May 10, 2010

ban me I don't care you have no clue what I have nor what I run. You want to believe you know what I have but you don't. And yes I did have a dyno run done so there ......... I don't have to prove myself to you.

bradleyem · May 10, 2010

Again let's :Track: or :Zip2:

bradleyem · May 10, 2010

R Martin said:
ban me I don't care you have no clue what I have.

Don't care because whatever it is you had to have someone else put it on for you.

R Martin said:
nor what I run.

Since your car nor you have NEVER been on any kind of track, that is a blank statement.

R Martin said:
You want to believe you know what I have but you don't.

Again, I don't care what you HAVE....I KNOW that you ARE a POSER.

R Martin said:
And yes I did have a dyno run done so there ......... I don't have to prove myself to you

Nope, you don't......just keep talking......you're just dishing out more and more

View attachment 219819

with every word....

Dyno run

westgastang5.0Coyote

d98gt

tank_567

Active Member

Rickyll7

Member

1991notchbackLX

Active Member

bradleyem

Member

KBExperience

Active Member

bradleyem

Member

bradleyem

Member

R Martin

New Member

CatmanJJ

Captain Tangnet

billfisher

Active Member

ninjastang125

New Member

bradleyem

Member

bradleyem

Member

rabidscoobie

bradleyem

Member

R Martin

New Member

bradleyem

Member

bradleyem

Member

Similar threads

Dyno run

Active Member

Member

Active Member

Member

Active Member

Member

Member

New Member

Captain Tangnet

Active Member

New Member

Member

Member

Member

New Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency