Dyno #'s Please Comment!!!

[Morgstang]

Just got car dynoed today. 2002 GT with underdrive pulleys, K&N FIPK cold air, 70 mm throttle body, C&L plenum, Magnaflow catted X with 2 chamber flows, and New Diablosport programable chip. Dyno results were 260.6 RWHP and 303.1 torque. Is this good numbers for my mods? Thanks for your comments.

 

['96&'01Stang]

That is really good numbers for your mods. Is that SAE or standard? What was your A/F ratio?

 

[Beau]

great numbers!

 

[Morgstang]

[QUOTE='96&'01Stang]That is really good numbers for your mods. Is that SAE or standard? What was your A/F ratio?[/QUOTE]
Hope i answer these correctly.I'm not the dyno expert. It was standard and the A/F ratio was about 12.20 at full throttle

 

['96&'01Stang]

I thought those numbers were a little high. Most people go by SAE numbers. Standard are always higher.

 

[03-s281]

Those are great numbers. My car dynoed at 232rwhp like it sits.

 

[Morgstang]

[QUOTE='96&'01Stang]I thought those numbers were a little high. Most people go by SAE numbers. Standard are always higher.[/QUOTE]
Uh oh im claiming ignorance here. What does SAE mean as opposed to Standard? The tuning was done at Houston Performance in Houston. Not exactly sure what your talking about.

 

[JonJon]

260rwhp? with just those?
oy

 

[Morgstang]

260rwhp? with just those?
oy

JonJon,
We were surprised ourselves. Steve and Chris at Houston performance did a wonderful job tuning the Diablosport chip. We started with a very lean condition with the stock computer and they worked for 3 hours to get it to those final #'s. My hats off to them.

 

[lopey4.6]

Great numbers.