E-brake issues

Mar 20, 2009
54
0
6
When I pull up the ebrake it engages however the light doesnt come on. This wouldnt be such a big deal except the other day I tried putting the top back up and it wouldnt go up because it didnt think the ebrake was engaged.

If I ever so slowly pull up the the ebrake the light will come on then quickly go back off once moved again. I have to get it to come on then hold the ebrake in place as i put the top up. This happens when I pull the brake only about an inch or two up.

any suggestions would help.

thanks
 
Exactly. The switch is mounted to the e-brake under the center console. You might be able to adjust it if you simply take the storage area out, but you might need to remove the center console completely.