e-cam timming

[gerzen]

hi fellas, im new here, and i have a problem, i have a 1982 302 (non roller) stang, and i put a e-303 cam, i make the swap, installing roller lifters, and all the KIT, the problems is that i take some vacum reads and the neddle give me low reads, below the 8 psi, i dont have a vacum leak, im prety sure, so the only wey to go is cheking the valve timming, i suspect the cam timming gears are diferent betwen the roller engine and the non roller one, so i install a roller cam whit a non roller cam timming chain and gears, thats why i suspect my cam is out of the right time, mi cuastion is, does any one have the spec of the e-cam i mean the open and close time, the lift, the lobe sep. the complete card cam spec.

any help i apreciated

 

[Jozey]

you could call a ford racing dealer and they should tell you

 

[Look Its Aaron]

heres your prob. your motor non roller the e-303 is a roller cam.problem solved

Don't jump the gun. Reading goes a long way.

i make the swap, installing roller lifters, and all the KIT

 

[gerzen]

i install the retro fit kit for install the roller e-cam, in my non roller block