ebay turbo kit

mustanggt04fast · Mar 2, 2010

http://cgi.ebay.com/ebaymotors/On-3...ewItemQQptZRace_Car_Parts?hash=item1e5ab89d47

seen this kit on ebay today anybody buy one or think it is credible any words of wisdom before i buy would be very helpfull

BK_CAULEY · Mar 2, 2010

ON3 HAS PROVEN THEMSELVES MULTIPLE TIMES. THEY ARE NOT SOME CHINA CRAP. DO A SEARCH ON TURBO MUSTANGS. SORRY FOR THE CAPS KEYBOARD IS ****ED UP.

mustanggt04fast · Mar 2, 2010

i was hopeing to here good words sweet

Tanus · Mar 2, 2010

alot of those cheap egay turbo kits look really cheesy, but that one actually looks very high quality.

Shiroelex · Mar 2, 2010

Just remember that you have to have a tubular K-member for this kit, as well as a MAF, injectors, fuel pump, and a tune. It will add up pretty quick. If you are set on a turbo, then this is a good start. If you are looking to go fast, I would suggest getting a nice centrifugal supercharger kit.

ItsStock02 · Mar 2, 2010

check out the pony down kit. Their website is ponydown.com. $2600 for the kit and it will work with your stock k member. Everything I've read about them on turbo mustang has been awesome.

mustanggt04fast · Mar 2, 2010

i ordered it it is shiping out tommorrow and will be here in 7 days
i found this on another forum Granatelli K-member Kit Special Only $499.99......check It Out!!!!

i just dont know how to get ahold of them on that forum this k member kit is the same one that they want with that turbo kit just 100 or more dollars cheeper. and i need a good spot to find injectors and fuel pump

im going to buy the On 3 Performance MAF kit (calibrated to specific injector size) $195 from on3performance

007 · Mar 2, 2010

ItsStock02 said:
check out the pony down kit. Their website is ponydown.com. $2600 for the kit and it will work with your stock k member. Everything I've read about them on turbo mustang has been awesome.

As long as your car isnt lowered, according to their website. It must hang low.

Mr. Rustypwnz · Mar 2, 2010

Shiroelex said:
Just remember that you have to have a tubular K-member for this kit, as well as a MAF, injectors, fuel pump, and a tune. It will add up pretty quick. If you are set on a turbo, then this is a good start. If you are looking to go fast, I would suggest getting a nice centrifugal supercharger kit.

a turbo 4.6 compared to a vortech/paxton 4.6 is no comparison.. ive drove both turbo all the way..

sneaky98gt · Mar 2, 2010

That's awesome man! When it'll all be said and done, that turbo kit will probably be a $1000 or so more expensive than the blower I'm putting on will be, except the turbo will be more than capable to push the limits of your stock motor, whereas my blower probably won't come close. Be sure you keep us posted; turboed 2v's aren't something we see every day.

RedDaemon · Mar 2, 2010

mustanggt04fast said:
i ordered it it is shiping out tommorrow and will be here in 7 days
i found this on another forum Granatelli K-member Kit Special Only $499.99......check It Out!!!!

2 year old thread

congrats on the purchase!

PLEASE do a [detailed] writeup or something!

mustanggt04fast · Mar 2, 2010

:SNSign:

sneaky98gt said:
That's awesome man! When it'll all be said and done, that turbo kit will probably be a $1000 or so more expensive than the blower I'm putting on will be, except the turbo will be more than capable to push the limits of your stock motor, whereas my blower probably won't come close. Be sure you keep us posted; turboed 2v's aren't something we see every day.

ill do that i dont really get on stangnet to much my work schedule keeps me well occuppied but i will surely keep everyone posted would not have even purchased the kit nor anything for my car with out your guys help

RedDaemon said:
2 year old thread

congrats on the purchase!

PLEASE do a [detailed] writeup or something!

i will thanks

D-BOI · Mar 2, 2010

i wonder what its going to sound like because in the ebay pics the mustang loses the dual exhaust all the way through

hotmustang331 · Mar 2, 2010

Hmm not too bad for just a hot and cold side I suppose...they did an amazing job on the fab work and placement looks really nice in all 304ss..I was tempted to use that myself...but didn't due to weight.
So are you going with a single t-70? Masterpower makes some very good turbos...and pretty inexpencive to boot

Shiroelex · Mar 2, 2010

I have heard nothing but terrible things about Granatelli parts. When it comes to something as critical as a K-member, I would never skimp out on the quality.

1991notchbackLX · Mar 2, 2010

I'd never invest in a kit made from 304 stainless. If I'm dropping any amount north of $2000 you bet your ass it's going to be 321. I'd garage my car until I could afford Ponydown, Hellion, or a custom fabbed kit, but that's just me.

"There's never enough money to do it right but there's always enough money to do it twice." Just my .02

BK_CAULEY · Mar 3, 2010

007 said:
As long as your car isnt lowered, according to their website. It must hang low.

it runs under the k-member

mustanggt04fast · Mar 3, 2010

D-BOI said:
i wonder what its going to sound like because in the ebay pics the mustang loses the dual exhaust all the way through

it sounded ok on the you tube videos

So are you going with a single t-70? Masterpower makes some very good turbos...and pretty inexpencive to boot [/QUOTE]
yes just a single t-70 for now untill something goes wrong with the turbo then i will upgrade to a better name brand one

Shiroelex said:
I have heard nothing but terrible things about Granatelli parts. When it comes to something as critical as a K-member, I would never skimp out on the quality.

can you suggest any other k member kits or websites

Shiroelex · Mar 3, 2010

Well, the two that I can think of off of the top of my head are the QA1 K member, and the Maximum Motorsports one. When I do mine, I'm going Maximum Motorsports all the way. MM even makes a K-member SPECIFICALLY for the Hellion turbo kits, that allows routing of the pipes through it. I bet if you get that K member, you could re-route this turbo kit's piping through it and not worry about being lowered.

mustanggt04fast · Mar 3, 2010

Shiroelex said:
Well, the two that I can think of off of the top of my head are the QA1 K member, and the Maximum Motorsports one. When I do mine, I'm going Maximum Motorsports all the way. MM even makes a K-member SPECIFICALLY for the Hellion turbo kits, that allows routing of the pipes through it. I bet if you get that K member, you could re-route this turbo kit's piping through it and not worry about being lowered.

sounds good ill look them up thanks

ebay turbo kit

mustanggt04fast

Member

BK_CAULEY

it's built for speed not longevity, woman

mustanggt04fast

Member

Tanus

New Member

Shiroelex

There's nothing worse than aut

ItsStock02

Member

mustanggt04fast

Member

007

Mr. Rustypwnz

Advanced Member

sneaky98gt

RedDaemon

mustanggt04fast

Member

D-BOI

Member

hotmustang331

Active Member

Shiroelex

There's nothing worse than aut

1991notchbackLX

Active Member

BK_CAULEY

it's built for speed not longevity, woman

mustanggt04fast

Member

Shiroelex

There's nothing worse than aut

mustanggt04fast

Member

Similar threads

ebay turbo kit

Member

it's built for speed not longevity, woman

Member

New Member

There's nothing worse than aut

Member

Member

Advanced Member

Member

Member

Active Member

There's nothing worse than aut

Active Member

it's built for speed not longevity, woman

Member

There's nothing worse than aut

Member

Similar threads

Privacy & Transparency

Privacy & Transparency