heres the deal i just shoved this 302 into my 99 mustang its fuel injected btw...
eec is an A9L and as far as i can tell i have a 91-93 eec harness
now being that this stuff is older i have to hard wire it into the car....i have evrything else figured out and already had a running crappy fuel injected 302 in it....however somehting with this wiring isnt right
pin 37 57 are for vehicle power wich are hot when switched on..
pin 1 is constant 12v
if pin 40 and 60 are power grounds then why the hell do they start melting while connecting them to ground...every diagram i have seen so far is showing 40 and 60 as a power ground doesnt matter what color the wires are they all show it going straight to the battery...when i do this they get hot...and arc and with these wires not hooked up my eec relay isnt going to function and i'm not getting my signal from pin 19 to the fuel pump relay i do have power from pin 22 to the pump relay but not 19 which is a ground signal
if you need to know what i have hooked up so far let me know i'll post it
eec is an A9L and as far as i can tell i have a 91-93 eec harness
now being that this stuff is older i have to hard wire it into the car....i have evrything else figured out and already had a running crappy fuel injected 302 in it....however somehting with this wiring isnt right
pin 37 57 are for vehicle power wich are hot when switched on..
pin 1 is constant 12v
if pin 40 and 60 are power grounds then why the hell do they start melting while connecting them to ground...every diagram i have seen so far is showing 40 and 60 as a power ground doesnt matter what color the wires are they all show it going straight to the battery...when i do this they get hot...and arc and with these wires not hooked up my eec relay isnt going to function and i'm not getting my signal from pin 19 to the fuel pump relay i do have power from pin 22 to the pump relay but not 19 which is a ground signal
if you need to know what i have hooked up so far let me know i'll post it